Tag Archives: pillow block bearing stainless

China supplier Ucfx07-23 Ucfx07 Ucfx08-24 Stainless Steel Food Beverage Shops Stainless Steel Pillow Block Ball Bearing Housing Bearing bearing bronze

Product Description

Product Description

Pillow block bearing
Bearings used with suitable standard housings are an economical, interchangeable method of bearing arrangement and simplify maintenance.
Based on the experience accumulated in various industrial fields, new designs and practical housings are continuously developed to meet the requirements of different applications.
Standard housings include:
Partial housing
Integral bearing housing
Flanged housing
 

 

Product Parameters

Product Specification

1. Needle roller bearing without inner ring

UCPG200

 BearingUint No Shaft Dia d Dimensinons(mm) Bolt Used Bearing No Housing No Housing
Wt (Kg)
(in) (mm) h a e b  t r g W Bi n (mm)
UCPG201-8
UCPG202-9
UCPG202-10
UCPG203-11
UCPG201
UCPG202
UCPG203
1/2
9/16
518
11/16
12
15
17
30.2 55 38 30 M6 12 14 57 26 10 M6X1 UCW201-8
UCW202-9
UCW202-10
UCW203-11
UCW201
UCW202
UCW203
PG203 0.3
UCPG201-8 1/2   33.3 70 49 38 M8 15 14 64 31 12.7 M8x1.25 UC201-8 PG204 0.5
UCPG202-9 9/16   UC202-9
UCPG202-10 5/8
11/16
  UC202-10
UCPG203-11   UC203-11
CPG204-12 3/4   UC204-12
UCPG201   12 UC201
UCPG202   15 UC202
UCPG203   17 UC203
UCPG204   20 UC204
UCPG205-13 13/16 25 36.5 75 50 38 M10 15 15 70 34.1 14.3 M10x1.5 JC205-13 PG205 0.5
UCPG205-14 7/8 UC205-14
UCPG205-15 15/16 JC205-15
UCPG205-16 1 UC205-16
UCPG205   UC205
UCPG206-17 1-1/16 30 42.9 85 60 48 M10 18 17 83 38.1 15.9 M10x1.5 UC206-17 PG206 0.75
UCPG206-18 1-1/8 UC206-18
JCPG206-19 1-3/16 UC206-19
UCPG206-20 1-1/4 UC206-20
UCPG206   UC206
UCPG207-20 1-1/4 35 47.6 100 68 48 M12 18 17 93 42.9 175  M12x1.75 UC207-20 PG207 1.3
UCPG207-21 1-5/16 UC207-21
UCPG207-22 1-3/8 UC207-22
UCPG207-23 1-7/16 UC207-23
UCPG207   UC207
UCPG208-24 1-1/2 40 49.2 110 78 54 M12 18 20 98 49.2 19.0 M12x1.75 UC208-24 PG208 1.2
UCPG208-25 1-9/16 UC208-25
UCPG208   UC208
UCPG209-26 1-5/8 45 53.9 120 85 54 M12 22 20 106 49.2 19.0 M12x1.75 UC209-26 PG209 1.6
UCPG209-27 1-11/16 UC209-27
UCPG209-28 1-3/4 UC209-28
UCPG209   UC209
UCPG210-29 1-13/16 50 57.2 135 95 60 M16 25 21 114 51.6 19.0 M16x2 UC210-29 PG210 2.2
UCPG210-30 1-7/8 UC210-30
UCPG210-31 1-15/16 UC210-31
UCPG210-32 2 UC210-32
UCPG210   UC210
UCPG211-32
UCPG211-33
UCPG211-34
UCPG211-35
UCPG211
2
2-1/16
2-1/8
2-3/16
55 63.5 140 100 60 M16 25 25 126 55.6 22.2 M16x2 UC211-32
UC211-33
UC211-34
UC211-35
UC211
PG211 2.7
UCPG212-36
UCPG212-37
UCPG212-38
UCPG212-39
UCPG212
2-1/4
2-5/16
2-3/8
2-7/16
60 69.8 150 105 70 M16 25 25 138 65.1 25.4 M16x2 JC212-36
UC212-37
JC212-38
UC212-39
UC212
PG212 3.15

UCPH200

 BearingUint No Shaft Dia d Dimensinons(mm)    Bolt Used Bearing No Housing No Housing
Wt(kg
in) (mm) h a e b S2 S1 g W Bi n (mm) (in)
UCPH201-8 1/2   70 127 95 40 19 13 15 101 31 12.7 M10 3/8 UC201-8 PH204 0.75
UCPH202-9 9/16   UC202-9
UCPH202-10 5/8   UC202-10
UCPH203-11 11/16   UC203-11
UCPH204-12 3/4   UC204-12
UCPH201   12 UC201
UCPH202   15 UC202
UCPH203   17 UC203
UCPH204   20 UC204
UCPH205-13 13/16 25 80 140 105 50 19 13 16 114 34.1 14.3 M10 3/8 UC205-13 PH205 1.0
UCPH205-14 7/8 UC205-14
UCPH205-15 15/16 UC205-15
UCPH205-16   UC205-16
UCPH205   UC205
UCPH206-17 1-1/16 30 90 165 121 50 21 17 18 130 38.1 15.9 M14 1/2 UC206-17 PH206 1.42
UCPH206-18 1-1/8 UC206-18
UCPH206-19 1-3/16 UC206-19
UCPH206-20 1-1/4 UC206-20
UCPH206   UC206
UCPH207-20 1-1/4 35 95 167 127 60 21 17 19 140 42.9 17.5 M14 1/2 UC207-20 PH207 1.55
UCPH207-21 1-5/16 UC207-21
UCPH207-22 1-3/8 UC207-22
UCPH207-23 1-7/16 UC207-23
UCPH207   UC207
UCPH208-24 1-1/2 40 100 184 137 70 25 17 19 149 49.2 19.0 M14 1/2 UC208-24 PH208 2.15
UCPH208-25 1-9/16 UC208-25
UCPH208   UC208
UCPH209-26 1-5/8 45 105 190 146 70 25 17 20 157 49.2 19.0 M14 1/2 UC209-26 PH209 2.31
UCPH209-27 1-11/16 UC209-27
UCPH209-28 1-3/4 UC209-28
UCPH209   UC209
UCPH210-29 1-13/16 50 110 206 159 70 25 20 22 165 51.6 19.0 M16 5/8 UC210-29 PH210 2.80
UCPH210-30 1-7/8 UC210-30
UCPH210-31 1-15/16 UC210-31
UCPH210-32 2 UC210-32
UCPH210   UC210
UCPH211-32 2 55 120 219 171 75 22 19 22 181 55.6 22.2 M16 5/8 UC211-32 PH211 4.4
UCPH211-33 2-1/16 UC211-33
UCPH211-34 2-1/8 UC211-34
UCPH211-35 2-3/16 UC211-35
UCPH211   UC211
UCPH212-36 2-1/4 60 130 235 184 85 23 19 25 197 65.1 25.4 M16 5/8 UC212-36 PH212 4.8
UCPH212-37 2-5/16 UC212-37
UCPH212-38 2-3/8 UC212-38
UCPH212-39 2-7/16 UC212-39
UCPH212   UC212
UCPH213-40 2-1/2 65 140 262 203 95 28 23 27 212 65.1 25.4 M20 3/4 UC213-40 PH213 5.6
UCPH213-41 2-9/16 UC213-41
UCPH213   UC213
UCPH214-42 2-5/8 70 150 268 210 105 28 23 28 225 74.6 30.2 M20 3/4 UC214-42 PH214 6.2
UCPH214-43 2-11/16 UC214-43
UCPH214-44 2-3/4 UC214-44
UCPH214   UC214
UCPH215-45 2-13/16 75 160 275 217 115 28 23 29 238 77.8 33.3 M20 3/4 UC215-45 PH215 7.4
UCPH215-46 2-7/8 UC215-46
UCPH215-47 2-15/16 UC215-47
UCPH215-48 3 UC215-48
UCPH215   UC215
UCPH216-50 3-1/8 80 170 290 232 125 28 23 30 253 82.6 33.3 M20 3/4 UC216-50 PH216 8.0
UCPH216   UC216

UCF200

Bearing Uint No.   Shaft Dia d Dimensinons(mm) Bolt Used Bearing No. Housing No. Housing
Wt  (kg)
  (in) (mm) a e   9   s t z1 z Bi n (mm) (in)
UCF201-8
UCF202-9
UCF202-10
UCF203-11
UCF201
UCF202
UCF203
1/2
9/16
5/8
H1/16
  12
  15
  17
76 54 15 11  25.5 11.5     31 26 10 M10 3/8 UCW201-8
UCW202-9
UCW202-10
UCW203-11
UCW201
UCW202
UCW203
F203 0.5
UCF201-8 /2   86 64 15 12  25.5 12 2 40.5 33.3 31 12.7 M10 3/8 UC201-8
UC202-9
UC202-10
UC203-11
UC204-12
UC201
UC202
UC203
F204 0.6
UCF202-9
UCF202-10
UCF203-11
UCF204-12
9/16  
5/8
1/18
34
 
 
 
UCF201     12
UCF202     15
UCF203     17
UCF204     20 UC204
UCF205-13 13/16   25 95 70 16 14  27 12 2 44.5 35.8 34.1 14.3 M10 3/8 UC205-13 F205 0.86
UCF205-14 7/8 UC205-14
UC205-15
UC205-16
UC205
UCF205-15 5/16
JCF205-16 1
UCF205  
UCF206-17 -/16   30 108 83 18 14  31 12 2 49 40.2 38.1 15.9 M10 3/8 UC206-17
UC206-1E
UC206-19
F206 1.1
UCF206-18 -1/8
UCF206-19 -3/16
UCF206-20 1-1/4 UC206-20
UCF206   UC206
JCF207-20 1-1/4   35 117 92 19 16  34 14 3 55 44. 42.9 17.5 M12 7/16 UC207-20 F207 1.6
UCF207-21 1-5/16 UC207-21
UCF207-22 1-3/8 UC207-22
 UCF207-23 1-7/16 UC207-23
JCF207   UC207
F208-24 1-1/2   40 130 102 21 16  38 16 3 62 51.2 49.2 19 M14 1/2 UC208-24 F208 1.9
UCF208-25 1-9/16 UC208-25
UC205
UCF208  
UCF209-26 -518   45 137 105 22 18  38 16 3 63 52.2 49.2 19 M14 1/2 UC209-26
UC209 28
F209 2.4
CF209-27 1-11/16
UCF209-28 -3/4
UCF209   UC209
UCF210-29 1-13/16   50 143 111 22 18  40 16 3 66.5 54.6 51.6 19 M14 1/2 UC210-29 F210 2.6
UCF210-30 1-7/8 UC210-30
UCF210-31 1-15/16 UC210-31
UCF210-32 2 UC210-32
UCF210   UC210
UCF211-32 2   55 162 130 25 20  43 19 4 71 58.4 55.6 22.2 M16 5/8 UC211-32 F211 3.5
JCF211-33 2./16 UC211-38
UCF211-34 2-/8 UC211-34
UC211-35
UCF211-35 2-3/16
UCF211   UC211
UCF212.36 2-1/4   60 175 143 29 20  48 19 4 80 68.7 65.1 25.4 M16 5/8 UC212-36 F212 4.2
UCF212-37 2-5/16 UC212-37
UCF212-38 2-3/8 UC212-38
JCF212-39 2-7/16 UC212-39
UCF212   UC212
UCF213-40 2-1/2   65 187 149 30 20  50 19 4 83.5 69.7 65.1 25.4 M16 5/8 UC213-40 F213 5.3
UCF213-41 2-9/16 UC213-41
UCF213   UC213
UCF214-42 2-518   70 193 152 31 24  54 19     75.4 74.6 30.2 M16 5/8 UC214-42 F214 5.5
UCF214-43 2-11/16 UC214-43
UCF214-44 2-3/4 UC214-44
JCF214   UC214
UCF215-45 2-13/16   75 200 159 34 24  56 19     78.5 77.8 33.3 M16 5/8 UC215-45 F215 6.2
UCF215-46 2-7/8 UC215-46
UCF215-47 2-15/16 UC215-47
UCF215-48 3 UC215-48
UCF215   UC215
UCF216-50 3-1/8   80 208 165 34 24  58 23     83.3 82.6 33.3 M20 3/4 UC216.50 F216 7.7
UCF216   UC216
UCF217-52 3-1/4   85 220 175 36 26  63 23     87.6 85.7 34.1 M20 3/4 UC217-52 F217 9
UCF217   UC217
UCF218-56 3-1/2   90 235 187 40 26  68 23     96.3 96.0 39.7 M20 3/4 UC218-56
UC218
F218 11.3
UCF218  

UCFX00

Bearing Unit
NO
Shaft Dia
d
Dimensions(mm) Bolt Used   Beafing
    No
Housing
No
Housing
Wt
(kg)
(in) (mm) a e i g   S    z Bi n (in)   (mm)
UCFX05-16
UCFX05
    25 108 83 18 13 30 12 40.2 38.1 15.9 3/8   M10 UCX05-16
UCX05
FX05 1.02
UCFX06-19
UCFX06-20
UCFX06
1-3/16
1-1/4
  30 117 92 19 14.3 34 16 44.4 49.2 17.5 1/2   14 UCX06-19
UCX06-20
UCX06
FX06 1.46
UCFX07-22
UCFX07-23
UCFX07
1-3/8
1-7116
  35 130 102 21 14.3 38 16 51.2 49.2 19 1/2   M14 UCX07-22
UCXX07-23
UCX07
FX07 1.94
UCFX08-24
UCFX08
1-1/2   40 137 105 22 14.3 40 19 52.2 49.2 19 5/8   M16 UCX08-24
UCX08
FX08 2.2
UCFX09-26
UCFX09-27
UCFX09-28
UCFX09
1-5/8
1-11/16
1-3/4
  45 143 111 23 14.3 40 19 55.6 51.6 19 5/8   M16 UCX09-28
UCX09-27
UCX 09-28
UCX09
FX09 2.42
UCFX10-31
UCFX10-32
UCFX10
1-15/16
2
  50 162 130 26 20 44 19 59.4 55.6 22.2 5/8   M16 UCX10-31
UCX 10-32
UCX10
FX10 3.41
UCFX11-35
UCFX11-36
UCFX11
2-3/16
2-1/4
  55 175 143 29 20 49 19 68.7 65.1 25.4 5/8   M16 UCX11-35
UCX 11-36
UCX11
FX11 4.52
UCFX12-38
UCFX12-39
UCFX12
2-3/8
2-7/16
  60 187 149 34 21 59 19 73.7 65.1 25.4 5/8   M16 JCX12-38
UCX 12-39
UCX12
FX12 5.32
UCFX13-40
UCFX13
2-1/2   65 187 149 34 21 59 19 78.4 74.6 30.2 5/8   M16 UCX13-40
UCX13
FX13 5.53
UCFX14-44
UCFX14
2-3/4   70 197 152 37 24 60 23 81.5 77.8 33.3 3/4   M20 UCX14-44
UCX14
FX14 6.77
UCFX15-47
UCFX15-48
UCFX15
2-15/16
3
  75 197 152 40 24 68 23 89.3 826 33.3 3/4   M20 UCX15-47
UCX15-48
UCX15
FX15 7.82
CEX16-50
UCFX16
3-1/8   80 214 171 40 24 70 23 91.6 85.7 34.1 3/4   M20 UCX16-50
UCX16
FX16 8.91
UCFX17-55
UCFX17
3-7/16   85 214 171 40 24 70 23 96.3 96 39.7 3/4   M20 UCX17-55
UCX17
FX17 10.23
UCFX18-56
UCFX18
3-1/2   90 214 171 45 24 76 23 106.1 104 429 3/4   M20 UCX18-56
UCX18
FX18 11.89
UCFX20-63
UCFX20-64
UCFX20
3-15/16
4
100 268 211 59 31 97 31 127.3 117.5 49.2 1-1/8   M27 UCX20-63
UCX20-64
JCX20
FX20 19.44

UCCF200

Bearing Unit NO Shaft Dia
d
Dimensions(mm) Bolt Used Beaning
   No
Housing No Housing
Wt (kg
   (in) (mm) a e i 5 Z Bi n mm in
UCCF201-8
UCCF202-9
UCCF202-10
UCCF203-11
UCCF204-12
UCCF20
UCCF202
UCCF203
UCCF204
1/2
9/16
5/8
11/16
314
12
15
17
20
86 64 15 12 46 31 12.7 M10 38 UC201-8
UC202-9
UC202-10
UC203-11
UC204-12
UC201
UC202
UC203
UC204
CF201
CF202
CF203
CF204
0.84
UCCF205-13
UCCF205-14
UCCF205-15
UCCF205-16
UCCF205
13/16
7/8
15/16
1
25 95 70 16 12 51 34.1 14.3 M10 318 UC205-13
UC205-14
UC205-15
UC205-16
UC205
CF205 1
UCCF206-17 1-1/16                     UC206-17    
UCCF206-18 1-1/8                     UC206-18    
UCCF206-19 1-3/16   108 83 18 12 55 38.1 15.9 M10 3/8 UC206-19 CF206 1.29
UCCF206-20 1-1/4                     UC206-20    
UCCF206   30                   UC206    
UCCF207-20
UCCF207-21
UCCF207-22
UCCF207-23
UCCF207
1-1/4
1-5/16
1-3/8
1-7/16
35 117 92 19 14 59 42.9 17.5 M12 7/16 UC207-20
UC207-21
UC207-22
UC207-23
UC207
CF207 1.61
UCCF208-24
UCCF208-25
UCCF208
1-1/2
1-9/16
40 130 102 21 16 686 49.2 19 M14 1/2 UC208-24
UC208-25
UC208
CF208 2.07
UCCF209-26
UCCF209-27
UCCF209-28
UCCF209
1.88
1-11/16
1-3/4
45 137 105 22 16 67 49.2 19 M14 1/2 UC209-26
UC209-27
UC209-28
UC209
CF209 2.42
UCCF210-29
UCCF210-30
UCCF210-31
UCCF210-32
UCCF210
1-13/16
1-7/8
1-15/16
50 143 111 22 16 71 51.6 19 M14 1/2 UC210-29
UC210-30
UC210-31
UC210-32
UC210
CF210 2.81
UCCF211-32
UCCF211-33
UCCF211-34
UCCF211-35
UCCF211
2-1/16
2-1/8
2-3/16
55 162 130 25 19 75 55.6 22.2 M16 5/8 UC211-32
UC211-33
UC211-34
UC211-35
UC211
CF211 3.56
UCCF212-36 2-1/4                     UC212-36    
UCCF212-37 2-5/16                     UC212-37    
UCCF212-38 2-3/8   175 143 29 19 86 65.1 25.4 M16 518 UC212-38 CF212 4.43
UCCF212-39 2-7/16                     UC212-39    
UCCF212   60                   UC212    
UCCF213-40
UCCF213-41
UCCF213
2-1/2
2-9/16
65 187 149 30 19 89 65.1 25.4 M16 518 UC213-40
UC213-41
UC213
CF213 5.37
UCCF214-42
UCCF214-43
UCCF214-44
UCCF214
2-518
2-11/16
2-3/4
70 193 152 31 19 98 74.6 30.2 M16 518 UC214-42
UC214-43
UC214-44
UC214
CF214 5.72
UCCF215-45
UCCF215-46
UCCF215-47
UCCF215-48
UCCF215
2-13/16
2-7/8
2-15/16
3
75 200 159 34 19 102 77.8 33.3 M16 518 UC215-45
UC215-46
UC215-47
UC215-48
UC215
CF215 6.35
UCCF216-50
UCCF216
3-/8 80 208 165 34 23 107 82.6 33.3 M20 3/4 UC216-50
UC216
CF216 7.14
UCCF217-52
UOCF217
3-1/4 85 220 175 36 23 111 85.7 34.1 M20 3/4 UC217-52
UC217
CF217 8.38
UCCF218-56
JCCF218
3-1/2 90 235 187 40 23 122 96 39.7 M20 3/4 UC218-56
UC218
CF218 10.5

 

Product Application

Transportation field:
Pillow block bearing are widely used in transportation equipment, such as cars, trains, locomotives, ships, and so on.

Industrial production field:
Pillow block bearing are also widely used in various production equipment, such as injection molding machines, rubber machines, food machinery, and so on.

Mechanical equipment field:
Pillow block bearing are widely used in various types of mechanical equipment, such as machine tools, agricultural machinery, construction machinery, metallurgical equipment, papermaking machinery, and so on.

Packaging & Shipping

FAQ

 

Q: Are you trading company or manufacturer?
A: We are bearing manufacturer.

Q: How do you control quality of bearing?
A: All products and services passed ISO9001-2008 Quality Certificate.

Q: What is the MOQ?
A: It depends on the bearing type. You can send inquiry or send e-mail  for more information.

Q: How about the package?
A: Industrial packing in general condition (Plastic tube+ carton+ pallet). Accept design package when OEM.

Q: How long is the delivery time?
A: The lead time for sample orders is 3-5 days, for bulk orders is 5-20 days., depends on the model and quantity.

Q: How about the shipping?
A: We can arrange the shipment or you may have the forwarder.

Q: Is sample avaiable?
A: Yes, sample order is acceptable.

Q: Can we use our own LOGO or design on bearings?
A: Yes. OEM is acceptable. We can design the bearing with your requirements and use your own LOGO and package design.

e /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Raceway: Spherical Raceway
Material: Bearing Steel
Bearing Block Model: P
Samples:
US$ 2/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

pillow block bearing

How do pillow block bearings contribute to the proper functioning of food processing equipment?

Pillow block bearings play a crucial role in ensuring the proper functioning of food processing equipment. They provide reliable support and smooth operation for rotating shafts and components in various stages of food processing. Here are the key contributions of pillow block bearings to the proper functioning of food processing equipment:

  • Sanitary Design:
  • In food processing environments, maintaining strict hygiene standards is essential. Pillow block bearings designed for food processing equipment are constructed with materials and features that adhere to sanitary requirements. They are often made from stainless steel or other corrosion-resistant materials that are easy to clean and withstand frequent washdowns. Additionally, these bearings have smooth surfaces, rounded edges, and minimal crevices to prevent the accumulation of food particles, debris, or bacteria. The sanitary design of pillow block bearings ensures the integrity and cleanliness of the equipment, minimizing the risk of contamination and ensuring compliance with food safety regulations.

  • Reliable Performance:
  • Food processing equipment operates under demanding conditions, including high production rates, heavy loads, and frequent start-stop cycles. Pillow block bearings are designed to withstand these challenges and provide reliable performance. They offer excellent load-bearing capacity, shock resistance, and vibration damping capabilities. This ensures smooth and stable operation of rotating shafts, reducing the risk of equipment failure, downtime, and production interruptions. By contributing to the reliable performance of food processing equipment, pillow block bearings support efficient and uninterrupted food processing operations.

  • Corrosion Resistance:
  • Food processing environments often involve exposure to moisture, chemicals, and cleaning agents. Pillow block bearings designed for food processing equipment are highly resistant to corrosion and chemical attack. They are made from materials that can withstand the corrosive effects of food acids, cleaning solutions, and other substances encountered in the processing area. The corrosion resistance of these bearings helps maintain their structural integrity, extends their lifespan, and ensures reliable performance even in harsh operating conditions.

  • Contamination Prevention:
  • Preventing contamination is of utmost importance in food processing. Pillow block bearings incorporate sealing mechanisms, such as rubber seals or labyrinth seals, to prevent the entry of contaminants into the bearing housing. These seals provide a barrier against dirt, dust, moisture, and other external elements, minimizing the risk of contamination of the food products. The effective sealing of pillow block bearings helps maintain the cleanliness and purity of the processing environment, safeguarding the quality and safety of the food products.

  • Easy Maintenance:
  • Maintenance and cleanliness are critical in food processing equipment. Pillow block bearings are designed for easy maintenance, inspection, and cleaning. They often have features such as grease fittings or lubrication access points that facilitate the replenishment of lubricants without disassembling the bearing. This simplifies routine maintenance tasks and allows for timely lubrication, ensuring optimal bearing performance. The ease of maintenance of pillow block bearings contributes to the overall efficiency and reliability of food processing equipment.

  • Versatility:
  • Food processing equipment encompasses a wide range of applications, such as mixing, grinding, conveying, and packaging. Pillow block bearings offer versatility and can be used in various equipment types and configurations. They are available in different sizes, load capacities, and mounting options to accommodate the specific requirements of different food processing applications. The versatility of pillow block bearings allows for their integration into diverse equipment designs, supporting the proper functioning of food processing machinery.

In summary, pillow block bearings contribute to the proper functioning of food processing equipment by offering a sanitary design, ensuring reliable performance, providing corrosion resistance, preventing contamination, enabling easy maintenance, and offering versatility. By fulfilling these roles, pillow block bearings support the efficient, hygienic, and uninterrupted operation of food processing equipment while maintaining the highest standards of food safety and quality.

pillow block bearing

How do pillow block bearings enhance the performance of agricultural machinery like tractors?

Pillow block bearings play a vital role in enhancing the performance of agricultural machinery, including tractors. Their contributions to the functionality and efficiency of tractors can be outlined as follows:

  • Support and Load Handling:
  • Pillow block bearings provide essential support for the rotating shafts and other moving components in agricultural machinery, such as tractors. They handle and transmit the loads applied to the machinery, including the weight of the equipment, implements, and the forces encountered during operation. By effectively supporting the shafts and components, pillow block bearings help maintain the structural integrity of the machinery and ensure smooth and efficient movement, contributing to overall performance.

  • Reduced Friction and Wear:
  • Pillow block bearings are designed to minimize friction between the rotating shafts and the bearing housing, reducing energy losses and wear. By incorporating rolling elements, such as balls or rollers, pillow block bearings facilitate smooth motion with reduced friction. This friction reduction results in improved energy efficiency, reduced power consumption, and extended lifespan of the bearings and other related components in the agricultural machinery like tractors.

  • Alignment and Stability:
  • Proper alignment of the components is crucial for the efficient operation of agricultural machinery, including tractors. Pillow block bearings aid in aligning and supporting the shafts and other moving parts, ensuring they remain centered and in the correct position. This alignment helps prevent excessive vibrations, reduces the risk of misalignment-related issues, and promotes stable and consistent performance, enhancing the overall functionality of tractors.

  • Contamination Protection:
  • Agricultural environments can be harsh, with exposure to dust, dirt, moisture, and other contaminants. Pillow block bearings are designed to provide protection against these contaminants. They often incorporate sealing mechanisms, such as rubber seals or labyrinth seals, to prevent the entry of foreign particles into the bearing. This protection helps maintain the cleanliness of the bearing’s internal components, reducing the risk of premature wear, corrosion, or damage, and contributing to the reliable and efficient operation of tractors.

  • Maintenance and Accessibility:
  • Maintenance is an essential aspect of ensuring the performance and longevity of agricultural machinery like tractors. Pillow block bearings are designed with ease of maintenance in mind. They often feature a split housing design that allows for convenient access to the bearing without the need to disassemble the entire machinery. This accessibility simplifies maintenance tasks, reduces downtime, and promotes efficient upkeep of the bearings, contributing to the overall performance and reliability of tractors.

In summary, pillow block bearings enhance the performance of agricultural machinery like tractors by providing support, handling loads, reducing friction and wear, ensuring alignment and stability, protecting against contaminants, and offering ease of maintenance. With their crucial role in supporting and facilitating the movement of shafts and components, pillow block bearings optimize the performance, energy efficiency, and lifespan of agricultural machinery, contributing to improved productivity and reliability in farming operations.

pillow block bearing

What advantages do pillow block bearings offer compared to other types of bearings?

Pillow block bearings, also known as plummer block bearings, offer several advantages compared to other types of bearings. These advantages make them a popular choice in various industrial applications. Here’s a detailed explanation of the advantages of pillow block bearings:

  • Easy Installation:
  • Pillow block bearings are designed for easy installation. The split housing allows for quick assembly and disassembly without the need to remove other components or disassemble the entire system. This feature simplifies bearing replacement, lubrication, and inspection, reducing downtime and maintenance costs.

  • Self-Aligning Capability:
  • Pillow block bearings are designed to accommodate slight misalignments or shaft deflections. This self-aligning capability helps to ensure smooth operation and reduce stress on the bearing. It allows for more flexibility in the installation process and helps compensate for any misalignment that may occur during operation.

  • Load Support:
  • Pillow block bearings are capable of handling both radial and axial loads, depending on the type of bearing insert used. This load-carrying capacity makes them suitable for a wide range of applications where there are varying load requirements. They provide reliable support for rotating shafts and help transmit loads between the shaft and the housing.

  • Environmental Protection:
  • Pillow block bearings offer a degree of environmental protection to the bearing insert. The housing acts as a shield, preventing contaminants such as dust, dirt, and moisture from entering the bearing and causing premature failure. This protection helps to extend the service life of the bearing and improve overall reliability.

  • Versatility and Adaptability:
  • Pillow block bearings are highly versatile and adaptable to various industrial applications. They can be found in a wide range of industries, including manufacturing, mining, agriculture, construction, and material handling. These bearings are used in conveyor systems, power transmission equipment, pumps, fans, compressors, and many other rotating machinery applications.

  • Easy Maintenance:
  • Due to their design, pillow block bearings are easy to maintain. The split housing simplifies lubrication, inspection, and replacement of the bearing insert. This ease of maintenance reduces downtime and allows for efficient servicing of the bearing, contributing to improved operational efficiency.

In summary, pillow block bearings offer several advantages compared to other types of bearings. These advantages include easy installation and maintenance, self-aligning capability, load support, environmental protection, versatility, and adaptability. These features make pillow block bearings a reliable and efficient choice for various industrial applications where ease of installation, flexibility, and durability are important factors.

China supplier Ucfx07-23 Ucfx07 Ucfx08-24 Stainless Steel Food Beverage Shops Stainless Steel Pillow Block Ball Bearing Housing Bearing   bearing bronzeChina supplier Ucfx07-23 Ucfx07 Ucfx08-24 Stainless Steel Food Beverage Shops Stainless Steel Pillow Block Ball Bearing Housing Bearing   bearing bronze
editor by CX 2024-05-14

China Custom Agricultural Machinery Seat Outer Spherical Bearing Ssucp205 Ssucfl205 Stainless Steel Pillow Block Bearing with Square Seat bearing air

Product Description

Product Description

 

 

 

Customized support OEM, ODM
Product name Stainless steel Pillow block bearing
  UIB packaging
Color Customized Color
Size Customized Size

Our Service

                                     High quality                                                                    Good Price                                                                         Fast Delivery
         Our workaplace has passed the ISO9001:2008                Good Price                                                                         Strong productivity is fast enough for delivery        
         Standard                                                                            The most cost-effective bearing                                                                                                  

 

 

Our Company

                       Factory                                                                                                                           Workshop                                    
                       
Our Factory                                                                                                                     Our Workshop

                       Warehouse
                       Our Warehouse                  
 

Packaging & Shipping

                                About Packaging

Normaly we deliver in neutral brand and package, brown carton box We provide single color UIB box for customer if request Custom brand and branded box also workable at a MOQ quantity 300~500pcs.

     Export wooden case contain cartons                            Export pallet                                                                       Export wooden case contain all in     
     non-fumigation wooden materialpallet                               non-fumigation wooden materialpallet                                 non-fumigation wooden materialcase                               case size:  1.1m*1.0m*0.8m weight about:                        size:1.1m*1.0m*0.8m                                                           size:1.2m*1.1m*1.1m
     950~1000KG                                                                      weight about:950~1000KG                                                  weight about:950~1200 KG                              
                                                                                                                                                                                                                                                                              Certifications
 Certifications

FAST DELIVERY SOLUTIONS

Fast delivery selections:
1.by air/by courier
2. by top brand express
3.by Alibaba running express
All aim to make a best efficiency delivery
and to Minimaze the cost to lowest for buyer.

Customer Photos

Customer from South Africa

We have make cooperation for many years 

and meet in the fair to communicate,change idea on new business chance.

 

Customer from Iran

New cusomer come to visit on our factory, working process ,packing process,etc.

Customer from Maroc

We have keep doing bearing business for many years,and still keep very good business cooperation.

                      

      UIB bearing we supply professional technical support and good sales communication to satisfy users. Through years of accumulation,
our company has built a supplier system that can be mastered by ourselves. 

By integrating resources, we can provide users with the Ultra ideal bearing solutions in the shortest time. Through resource integration, the inventory is given to the most neededcustomers in the fastest time, and the customer’s demand is met as quickly as possible. 

Through the rational allocation ofresources, customers can get the best bearing solution with the least amount of money. Through resources and management, smallbatch orders can be accepted, saving costs and reducing capital pressure for customers’ purchases.

Provide an efficient solution:after we fully understand the customer’s needs and the quality requirements of the environment for the bearing. We will inform thecustomer of the model, the order quantity, the material used, the price, the accuracy level, etc. 

Our business philosophy: win-wincooperation and sustainable development. 

Our efforts: to provide customers with the Ultra Ideal Bearing solutions. Currently, our hot products include ball bearings, roller bearings, agriculture bearings, wheel bearings, truck trailer axle bearings, auto parts, construction equipment and agriculture machinery parts. 

We have got valuable certifications like IATF 16949:2016 under the top strict evaluation from the authority. Truck trailer axle bearing and automotive bearing we can do OEM serivce & after sales market quite capable. 

We have been cooperating with equipment manufacturer in Agriculture machine, Air compressor, Automotive
industry, Motorcycle industry, etc.
We are willing to built business relation with you and do hope can do cooperation with new
business chance. At the same time, according to our inventory spot resources, we are willing to help bearing dealers by providing
faster and more comprehensive services.

FAQ

1. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

2.what can you buy from us?
Auto Bearing,Bushing,Bearing Housing,Taper Roller Bearing,Auto Spare Parts,roller chain

3. why should you buy from us not from other suppliers?
One stop bearing and mechanical customized parts,
Designed bearing,
OEM ODM bearing service
UIB provides Ultra Ideal Bearing
Small quantity order available 
Factory price offer

4. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,CPT,DEQ,DDP,DDU,Express Delivery;

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Aligning: Aligning Bearing
Separated: Separated
Rows Number: Single
Samples:
US$ 20/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

pillow block bearing

What role do pillow block bearings play in applications with varying temperature and environmental conditions?

Pillow block bearings play a crucial role in applications with varying temperature and environmental conditions by providing reliable and durable support for rotating shafts and components. Their specific contributions in such applications can be explained as follows:

  • Temperature Stability:
  • Pillow block bearings are designed to withstand a wide range of operating temperatures. They are often constructed with materials that can handle both high and low temperature extremes. Specialized heat-resistant materials, such as high-temperature alloys or heat-treated steels, are used to ensure the bearing’s stability and integrity even in applications with elevated temperatures. By maintaining their structural integrity under varying temperature conditions, pillow block bearings help ensure the continued functionality and performance of the machinery.

  • Expansion and Contraction Compensation:
  • Varying temperature conditions can cause thermal expansion and contraction of the components in machinery. Pillow block bearings are engineered to accommodate these dimensional changes. By allowing for slight movement and adjustment due to thermal expansion, they help prevent excessive stress on the shafts and other components. This compensation for thermal expansion and contraction contributes to the overall stability and longevity of the machinery, even in environments with significant temperature fluctuations.

  • Environmental Protection:
  • In applications with varying environmental conditions, pillow block bearings provide protection against contaminants, moisture, and other external elements. They often incorporate sealing mechanisms, such as rubber seals or labyrinth seals, to prevent the entry of dirt, dust, water, and other contaminants into the bearing. This protection helps maintain the cleanliness and integrity of the bearing’s internal components, reducing the risk of premature wear, corrosion, or damage caused by environmental factors. By safeguarding the bearing, pillow block bearings ensure reliable and efficient operation in environments with varying conditions.

  • Corrosion Resistance:
  • In corrosive environments where moisture, chemicals, or other corrosive agents are present, pillow block bearings with corrosion-resistant materials, such as stainless steel or special coatings, offer additional protection. These bearings are designed to withstand the corrosive effects of the environment, preventing degradation and maintaining their functionality over an extended period. By providing corrosion resistance, pillow block bearings enhance the reliability and lifespan of machinery operating in environments with varying temperature and corrosive conditions.

  • Shock and Vibration Absorption:
  • Applications with varying temperature and environmental conditions often involve machinery subjected to shocks and vibrations. Pillow block bearings are engineered to absorb and dampen these shocks and vibrations, reducing their impact on the rotating shafts and other components. This absorption capability helps prevent excessive stress, minimizes the risk of component failure, and ensures the smooth and reliable operation of the machinery, even in environments with dynamic conditions.

  • Maintenance and Longevity:
  • Pillow block bearings designed for applications with varying temperature and environmental conditions often incorporate features that simplify maintenance and extend bearing life. They may have lubrication systems or self-lubricating properties that ensure proper lubrication even in challenging environments. Additionally, they may be designed for easy inspection, cleaning, and replacement, allowing for timely maintenance and minimizing downtime. These features contribute to the longevity and reliability of the machinery in applications with varying temperature and environmental conditions.

In summary, pillow block bearings play a critical role in applications with varying temperature and environmental conditions by providing temperature stability, compensating for expansion and contraction, protecting against contaminants and corrosion, absorbing shocks and vibrations, and facilitating maintenance and longevity. Their ability to withstand and adapt to changing conditions ensures the reliable operation and extended lifespan of machinery in diverse environments.

pillow block bearing

What are the signs of wear or damage in pillow block bearings, and when should they be replaced?

Pillow block bearings can experience wear or damage over time due to various factors. It is important to monitor their condition regularly to identify signs of wear or damage and determine when replacement is necessary. The following are common signs of wear or damage in pillow block bearings and indicators for replacement:

  • Abnormal Noise:
  • If you notice unusual noises such as grinding, squeaking, or rumbling coming from the pillow block bearing, it can be an indication of wear or damage. Excessive noise often suggests that the rolling elements or the bearing raceways are worn or pitted. In such cases, the pillow block bearing should be replaced to prevent further damage and potential failure.

  • Increased Vibration:
  • An increase in vibration levels can be a sign of problems within the pillow block bearing. Excessive vibration indicates that the bearing may be worn, misaligned, or damaged in some way. If the vibration cannot be resolved through other means, it is advisable to replace the pillow block bearing to restore smooth and efficient operation.

  • Irregular Movement:
  • If the shaft supported by the pillow block bearing exhibits irregular or uneven movement, it can be a sign of bearing wear or damage. The bearing may have developed play or lost its original precision, resulting in erratic motion. In such cases, replacing the pillow block bearing is necessary to ensure proper functioning and prevent further issues.

  • Excessive Heat:
  • If the pillow block bearing becomes unusually hot to the touch during operation, it is an indication of potential problems. Excessive heat generation can result from inadequate lubrication, misalignment, or bearing damage. Continued operation under such conditions can lead to accelerated wear and premature failure. In such cases, the pillow block bearing should be replaced and the underlying causes addressed to prevent further damage.

  • Lubrication Issues:
  • Pillow block bearings require proper lubrication to ensure smooth operation and reduce friction. If there are signs of inadequate lubrication, such as dry or discolored bearing surfaces, it can lead to increased wear and potential bearing failure. If lubrication issues cannot be resolved through lubricant replenishment or maintenance, replacing the pillow block bearing may be necessary.

  • Visible Damage:
  • Inspect the pillow block bearing visually for any visible signs of damage, such as cracks, dents, or corrosion. These visible indications may suggest that the bearing has been subjected to excessive loads, contamination, or harsh operating conditions. If significant damage is observed, replacing the pillow block bearing is recommended.

It is important to note that the specific signs of wear or damage in pillow block bearings may vary depending on the type of bearing and the application. Regular monitoring, maintenance, and following the manufacturer’s guidelines are essential for identifying potential issues and determining the appropriate timing for replacement. When in doubt, consulting with a bearing specialist or qualified technician can provide valuable insights and guidance for replacing pillow block bearings.

pillow block bearing

What factors should be considered when selecting a pillow block bearing for a specific application?

When selecting a pillow block bearing for a specific application, several factors should be taken into consideration to ensure optimal performance and reliability. Here’s a detailed explanation of the factors that should be considered:

  • Load Requirements:
  • One of the primary factors to consider is the load requirements of the application. Determine the magnitude and direction of the loads that the bearing will be subjected to, including both radial and axial loads. This will help in selecting a pillow block bearing with the appropriate load capacity and load distribution characteristics to handle the specific application’s demands.

  • Speed and Operating Conditions:
  • Consider the speed at which the bearing will operate and the operating conditions it will be exposed to. Factors such as temperature, humidity, vibration, and contamination levels can affect bearing performance. Select a pillow block bearing that is designed to withstand the anticipated speed and operating conditions, ensuring proper lubrication, heat dissipation, and protection against external elements.

  • Shaft Size and Misalignment:
  • Take into account the shaft size and any potential misalignment that may occur during operation. Ensure that the pillow block bearing has the correct bore size to fit the shaft diameter. Additionally, consider the self-aligning capability of the bearing to accommodate any misalignments or shaft deflections that may occur. This will help prevent premature wear and failure of the bearing.

  • Environmental Factors:
  • Assess the environmental factors that the pillow block bearing will be exposed to. Consider the presence of contaminants, such as dust, dirt, moisture, or chemicals, and select a bearing with appropriate sealing or shielding options to prevent ingress and protect against corrosion. For harsh or specialized environments, consider choosing bearings with specific coatings or materials that offer enhanced resistance to corrosion, high temperatures, or aggressive substances.

  • Maintenance Requirements:
  • Consider the maintenance requirements of the application. Evaluate factors such as accessibility, lubrication intervals, and ease of bearing replacement. Select a pillow block bearing that aligns with the maintenance capabilities and resources available, ensuring that the bearing can be properly lubricated, inspected, and serviced as needed to maintain optimal performance and prolong its service life.

  • Cost and Availability:
  • While considering the technical requirements, it’s also essential to evaluate the cost and availability of the pillow block bearing. Compare the pricing and availability from different suppliers or manufacturers. Keep in mind that choosing a high-quality bearing from a reputable supplier may provide better long-term value through improved performance and durability.

By carefully considering these factors when selecting a pillow block bearing for a specific application, you can ensure that the chosen bearing meets the requirements of the application, operates reliably, and contributes to the overall efficiency and productivity of the machinery or system.

China Custom Agricultural Machinery Seat Outer Spherical Bearing Ssucp205 Ssucfl205 Stainless Steel Pillow Block Bearing with Square Seat   bearing airChina Custom Agricultural Machinery Seat Outer Spherical Bearing Ssucp205 Ssucfl205 Stainless Steel Pillow Block Bearing with Square Seat   bearing air
editor by CX 2024-05-13

China manufacturer Agriculture Stainless Steel Pillow Block Ball Bearing Insert Bearing bearing example

Product Description

   

Company Profile

       MKS Hydraulics ZheJiang Co., Ltd.is a scientific and professional bearing producing enterprise, gathering R&D, producing and sales as 1  integration.mainly operating on non-standard, special andgeneral bearings.

       The company is especially focusing on the research and manufacture of general high-tech production with the 20 years R&D experience, professional R&D staff and advanced equipment, of which 8 sets are imported equipment and 40 sets are high-precision processing equipment. it has invested for building a modern workshop, including 1 Bainite heat processing workshop of world advanced level, 1 machine processing workshop, 2 moder thermostatic &no-dust roller grinders, assembly workshop, physical-chemical testing center, heating laboratory and moder-managed warehouse. Depending on the markets in China and abroad, the company puts an active attitude upon products R&D, resulting a healthy circulation of 1 development generation, 1 reserve generation, and 1 producion generation. The enterprise enlarges the R&D investment, creates own brand, and strives to increase the exporting products of high-tech & high value-added, gains the honorable sales result and grows into 1 of the largest R&D enterprise in China of non-standard bearing and special bearing.

       The advanced technology, outstanding quaity and considerable service after sales with enthusiasm make us get the rapid development in quite short time of years, and now it becomes the largest developing and producing enterprise in Asia of concrete carrier truck, speed-reducing machine,mine-digging machine, hydraulic pump spindle bearing and crecent bearing. With the continuing and wholly new developing theory of Technology is the motivation and quality is the life, We are not only pursuing the leading position in China, but also determined to march into the worldwide bearing area during it developing process, The products are mainly applied on the industries of mine, metalurgy, engineering, machineny, machine tool,electronic machine and so on, The products have gained the excllent sales resul in the markets of Europe, Southeast Asia, Middle East and so on in a dozen of countries and areas.

Company Environment

Company Advantages

Packaging & Shipping

FAQ

1. how can we guarantee quality?
Always final Inspection before shipment;

2.what can you buy from us?
Auto Bearing,Bearing Housing,Taper Roller Bearing,Casting,Hydraulic pump,Hydraulic parts,excavator parts and so on.

Ceep groove ball bearing/Self aligning ball bearing/Cylindrical roller bearing/Spherical roller bearing/ Angular contact ball bearing/Tapered roller bearing/ Thrust ball bearing/Thrust cylindrical roller bearing/Needle roller bearing

3. why should you buy from us not from other suppliers?
One stop bearing and mechanical customized parts,
Designed bearing,
Small quantity order available 
Factory price offer
OEM ODM bearing service

4.What is the transportation?
lf small quantity,we suggest to send by express,such as DHL,UPS,TNT FEDEX flarge amount,by air or sea shipping.

5.Can we design packaging?
Except regular packing,and we can make customer’s own packing.

6.What’s your payment method?
We can accept LC, T/T, D/P, PayPal, Western Union, Small-amount payment, MoneyGram etc.

7.Can the company provide free samples?
We can provide samples for free. You only need to provide shipping.

8.Is the company a production factory or a trading company?
MKS company is a manufacturing enterprise focusing on bearings ,hydraulic pumps and hydraulic parts , produce and sales.

If you have any questions,Please contact us,We must be reply quickly.

 

 

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Contact Angle: 15°
Aligning: Non-Aligning Bearing
Separated: Unseparated
Rows Number: Single
Load Direction: Radial Bearing
Material: Stainless Steel
Samples:
US$ 100/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

pillow block bearing

How do pillow block bearings improve the functionality of heavy-duty equipment like mining conveyors?

Pillow block bearings play a crucial role in enhancing the functionality and performance of heavy-duty equipment like mining conveyors. Their contributions to the reliable operation and efficiency of mining conveyors can be explained as follows:

  • Support and Load Handling:
  • Pillow block bearings provide essential support for the rotating shafts and other moving components in mining conveyors. They handle and transmit the significant loads encountered in conveyor systems, including the weight of the conveyed materials and the forces associated with their movement. By effectively supporting the shafts and components, pillow block bearings help maintain the structural integrity and stability of the conveyor, ensuring smooth and efficient material handling.

  • Reduced Friction and Energy Efficiency:
  • Pillow block bearings are designed to minimize friction between the rotating shafts and the bearing housing, resulting in reduced energy losses and improved energy efficiency. By incorporating rolling elements, such as balls or rollers, pillow block bearings facilitate smooth motion with minimal friction. This reduction in friction translates into energy savings, reducing the power consumption required to drive the conveyor system and contributing to overall operational efficiency.

  • Alignment and Stability:
  • Proper alignment of the conveyor components is critical for the reliable operation of mining conveyors. Pillow block bearings aid in aligning and supporting the shafts and other moving parts, ensuring they remain centered and in the correct position. This alignment helps prevent excessive vibrations, reduces the risk of misalignment-related issues, and promotes stable and consistent operation of the conveyor, enhancing its functionality and reliability.

  • Contamination Protection:
  • Mining environments are often harsh, with exposure to dust, dirt, moisture, and other contaminants. Pillow block bearings are designed to provide protection against these contaminants. They often incorporate sealing mechanisms, such as rubber seals or labyrinth seals, to prevent the entry of foreign particles into the bearing. This protection helps maintain the cleanliness of the bearing’s internal components, reducing the risk of premature wear, corrosion, or damage, and ensuring the reliable and efficient operation of the mining conveyor.

  • Impact Resistance and Durability:
  • Heavy-duty equipment like mining conveyors is subjected to rigorous operating conditions, including high loads, impacts, and vibrations. Pillow block bearings are designed to withstand such demanding conditions. They are constructed with robust materials and engineered to provide high load capacity and excellent impact resistance. This durability ensures that the bearings can withstand the demanding working environments of mining conveyors, reducing the risk of premature failure and minimizing downtime.

  • Maintenance and Accessibility:
  • Maintenance is crucial for the optimum performance and longevity of heavy-duty equipment like mining conveyors. Pillow block bearings are designed with maintenance in mind. They often feature a split housing design that allows for convenient access to the bearing without the need to disassemble the entire conveyor system. This accessibility simplifies maintenance tasks, reduces downtime, and promotes efficient upkeep of the bearings, contributing to the overall functionality and reliability of mining conveyors.

In summary, pillow block bearings greatly enhance the functionality of heavy-duty equipment like mining conveyors by providing support, handling heavy loads, reducing friction and energy consumption, ensuring alignment and stability, protecting against contamination, and offering durability and accessibility for maintenance. With their essential role in supporting and facilitating the movement of conveyor components, pillow block bearings optimize the performance, energy efficiency, and lifespan of mining conveyors, contributing to improved productivity and reliability in mining operations.

pillow block bearing

How do pillow block bearings enhance the performance of agricultural machinery like tractors?

Pillow block bearings play a vital role in enhancing the performance of agricultural machinery, including tractors. Their contributions to the functionality and efficiency of tractors can be outlined as follows:

  • Support and Load Handling:
  • Pillow block bearings provide essential support for the rotating shafts and other moving components in agricultural machinery, such as tractors. They handle and transmit the loads applied to the machinery, including the weight of the equipment, implements, and the forces encountered during operation. By effectively supporting the shafts and components, pillow block bearings help maintain the structural integrity of the machinery and ensure smooth and efficient movement, contributing to overall performance.

  • Reduced Friction and Wear:
  • Pillow block bearings are designed to minimize friction between the rotating shafts and the bearing housing, reducing energy losses and wear. By incorporating rolling elements, such as balls or rollers, pillow block bearings facilitate smooth motion with reduced friction. This friction reduction results in improved energy efficiency, reduced power consumption, and extended lifespan of the bearings and other related components in the agricultural machinery like tractors.

  • Alignment and Stability:
  • Proper alignment of the components is crucial for the efficient operation of agricultural machinery, including tractors. Pillow block bearings aid in aligning and supporting the shafts and other moving parts, ensuring they remain centered and in the correct position. This alignment helps prevent excessive vibrations, reduces the risk of misalignment-related issues, and promotes stable and consistent performance, enhancing the overall functionality of tractors.

  • Contamination Protection:
  • Agricultural environments can be harsh, with exposure to dust, dirt, moisture, and other contaminants. Pillow block bearings are designed to provide protection against these contaminants. They often incorporate sealing mechanisms, such as rubber seals or labyrinth seals, to prevent the entry of foreign particles into the bearing. This protection helps maintain the cleanliness of the bearing’s internal components, reducing the risk of premature wear, corrosion, or damage, and contributing to the reliable and efficient operation of tractors.

  • Maintenance and Accessibility:
  • Maintenance is an essential aspect of ensuring the performance and longevity of agricultural machinery like tractors. Pillow block bearings are designed with ease of maintenance in mind. They often feature a split housing design that allows for convenient access to the bearing without the need to disassemble the entire machinery. This accessibility simplifies maintenance tasks, reduces downtime, and promotes efficient upkeep of the bearings, contributing to the overall performance and reliability of tractors.

In summary, pillow block bearings enhance the performance of agricultural machinery like tractors by providing support, handling loads, reducing friction and wear, ensuring alignment and stability, protecting against contaminants, and offering ease of maintenance. With their crucial role in supporting and facilitating the movement of shafts and components, pillow block bearings optimize the performance, energy efficiency, and lifespan of agricultural machinery, contributing to improved productivity and reliability in farming operations.

pillow block bearing

What advantages do pillow block bearings offer compared to other types of bearings?

Pillow block bearings, also known as plummer block bearings, offer several advantages compared to other types of bearings. These advantages make them a popular choice in various industrial applications. Here’s a detailed explanation of the advantages of pillow block bearings:

  • Easy Installation:
  • Pillow block bearings are designed for easy installation. The split housing allows for quick assembly and disassembly without the need to remove other components or disassemble the entire system. This feature simplifies bearing replacement, lubrication, and inspection, reducing downtime and maintenance costs.

  • Self-Aligning Capability:
  • Pillow block bearings are designed to accommodate slight misalignments or shaft deflections. This self-aligning capability helps to ensure smooth operation and reduce stress on the bearing. It allows for more flexibility in the installation process and helps compensate for any misalignment that may occur during operation.

  • Load Support:
  • Pillow block bearings are capable of handling both radial and axial loads, depending on the type of bearing insert used. This load-carrying capacity makes them suitable for a wide range of applications where there are varying load requirements. They provide reliable support for rotating shafts and help transmit loads between the shaft and the housing.

  • Environmental Protection:
  • Pillow block bearings offer a degree of environmental protection to the bearing insert. The housing acts as a shield, preventing contaminants such as dust, dirt, and moisture from entering the bearing and causing premature failure. This protection helps to extend the service life of the bearing and improve overall reliability.

  • Versatility and Adaptability:
  • Pillow block bearings are highly versatile and adaptable to various industrial applications. They can be found in a wide range of industries, including manufacturing, mining, agriculture, construction, and material handling. These bearings are used in conveyor systems, power transmission equipment, pumps, fans, compressors, and many other rotating machinery applications.

  • Easy Maintenance:
  • Due to their design, pillow block bearings are easy to maintain. The split housing simplifies lubrication, inspection, and replacement of the bearing insert. This ease of maintenance reduces downtime and allows for efficient servicing of the bearing, contributing to improved operational efficiency.

In summary, pillow block bearings offer several advantages compared to other types of bearings. These advantages include easy installation and maintenance, self-aligning capability, load support, environmental protection, versatility, and adaptability. These features make pillow block bearings a reliable and efficient choice for various industrial applications where ease of installation, flexibility, and durability are important factors.

China manufacturer Agriculture Stainless Steel Pillow Block Ball Bearing Insert Bearing   bearing exampleChina manufacturer Agriculture Stainless Steel Pillow Block Ball Bearing Insert Bearing   bearing example
editor by CX 2024-05-09

China OEM Stainless Steel Waterproof Pillow Block Bearing connecting rod bearing

Product Description

                                                                               Welcome to choose HangZhou CZPT Bearing Co., Ltd

NO 1. our adwantages:
1. 20 years of experience in bearing manufacturing and sales
2. Accept OEM customization
3. Our main bearing products include Deep groove ball bearings, tapered roller bearings, cylindrical roller bearings, angular contact bearings, needle roller bearings, thrust ball bearings, spherical bearings, automotive bearings pump bearings, and many nonstandard bearings are also in our product range.
4. Sample available

NO 2. Pillow block bearing
The outer spherical ball bearing is actually an improved version of the deep groove ball bearing. Its characteristic is that the outer diameter surface of its outer ring is spherical, which can fit into the corresponding concave spherical surface of the bearing seat, playing a role in automatic centering. Outer spherical bearings are mainly used to withstand combined radial and axial loads, mainly radial loads, and are generally not suitable for bearing axial loads alone.
Outer spherical ball bearing with seat
A spherical bearing with a seat is a bearing unit that combines a rolling bearing with a housing. Most outer spherical bearings make the outer diameter into a spherical surface and are installed together with a bearing seat with a spherical inner hole. There are various structural forms, with good universality and interchangeability.
At the same time, this type of bearing also has a certain degree of self-alignment in design, convenient installation, and a dual structure sealing device, which can work in harsh environments. The bearing seat is generally cast. Commonly used seats include vertical seat (P), square seat (F), convex square seat (FS), convex circular seat (FC), CZPT seat (FL), circular seat (C), slider seat, etc. (T).
Outer spherical bearings with seats are divided into bearing cores and bearing seats. From the name, it is called bearing center plus bearing seat. For example, an outer spherical bearing with a set screw UC205 and a vertical seat is called UCP205. Due to the strong interchangeability between the outer spherical bearing and the seat, the bearing core can be freely assembled in bearing seats of the same specification and different shapes.
other
Vertical seat outer spherical ball bearing square
pillow blocks
Rhombic seat
Outer spherical ball bearing with raised cylindrical seat
Spherical ball bearing with ring seat outer spherical ball bearing
Sliding block seat outer spherical ball bearing
Outer spherical ball bearing with suspension seat
Outer spherical ball bearing with suspension seat
Outer spherical ball bearing with adjustable CZPT seat
Stamped seat outer spherical ball bearing
Outer spherical ball bearing with other seats
NO 3. Own brand(Y@H) and OEM

  1. deep groove ball bearing
    2. Pillow block bearing
    3. Spherical Roller bearing
    4. thrust bearing
    5. Cylindrical Roller bearing
    6. Tapered roller bearing
    7. needle bearing
    8. Angular contact ball bearing
    9. Non-standard bearing

    NO 4. Pillow block bearing

Model Pillow block bearing
  1. Bearing Material
  1. Chrome Steel Gcr-15
brand OEM of Y@H
  1. Housing material
  1. Cast Iron HT200
Precision P0 P4 P5 P6
  1. Feature
  1. High Precision, High Speed, Low Friction, Low vibration, Long life
Vibration Z1V1 Z2V2 Z3V3 Z4V4
  1. Delivery Time
  1. 7-15 days after contract
Clearance C1 C2 C3 C4 C5 Package Tube package+outer carton+pallets;
Single box+outer carton+pallets;
According to your requirement
Hardness HRC60-HRC63    

NO 5. Pillow block bearing specifications
 

Unit No Shaft Dia Dimensions (mm) Weight(kg)
    D B S L J H H1 A N N1
UCP201 12 40 27.4 11.5 125 96 30.2 57 36 13 19 0.6
UCP202 15 40 27.4 11.5 125 96 30.2 57 36 13 19 0.7
UCP203 17 40 27.4 11.5 125 96 30.2 57 36 13 19 0.7
UCP204 20 47 31 12.7 127 95 33.3 65 38 13 19 0.75
UCP205 25 52 34.1 14.3 140 105 36.5 71 38 13 19 0.8
UCP206 30 62 38.1 15.9 165 121 42.9 83 48 17 23 1.3
UCP207 35 72 42.9 17.5 167 127 46.7 93 48 17 23 1.6
UCP208 40 80 42.9 19 184 137 49.2 100 54 17 23 1.9
UCP209 45 85 49.2 19 190 146 54 106 54 17 23 2.2
UCP210 50 90 51.6 19 206 159 57.2 114 60 20 26 2.6
UCP211 55 100 55.6 22.2 219 171 63.5 126 60 20 26 3.3
UCP212 60 110 65.1 25.4 241 184 69.8 138 70 20 26 4.6
UCP213 65 120 65.1 25.4 265 203 76.2 151 70 25 31 5.9
UCP214 70 125 74.6 30.2 266 210 79.4 157 72 25 31 6.6
UCP215 75 130 77.8 33.3 275 217 82.6 163 74 25 31 7.4
UCP216 80 140 82.6 33.3 292 232 88.9 175 78 25 31 9.0
UCP217 85 150 85.7 34.1 310 247 95.2 187 83 25 31 11
UCP218 90 160 96 39.7 327 262 101.6 200 88 27 33 13
UCP220 100 180 108 42 380 308 115 225 95 30 38 16
UCP305 25 62 38 15 175 132 45 85 45 17 20 1.4
UCP306 30 72 43 17 180 140 50 95 50 17 20 1.8
UCP307 35 80 48 19 210 160 56 106 56 17 25 2.8
UCP308 40 90 52 19 220 170 60 116 60 17 27 3.0
UCP309 45 100 57 22 245 190 67 129 67 20 30 4.1
UCP310 50 110 61 22 275 212 75 143 75 20 35 5.8
UCP311 55 120 66 25 310 236 80 154 80 20 38 7.4
UCP312 60 130 71 26 330 250 85 165 85 25 38 9.4
UCP313 65 140 75 30 340 260 90 176 90 25 38 10.0
UCP314 70 150 78 33 360 280 95 187 90 27 40 12.0
UCP315 75 160 82 33 380 290 100 198 100 27 40 14.0
UCP316 80 170 86 34 400 300 106 210 110 27 40 18.0
UCP317 85 180 96 40 420 320 112 220 110 33 45 20.0
UCP318 90 190 96 40 430 330 118 235 110 33 45 24.0
UCP319 95 200 103 41 470 360 125 250 120 36 50 29.0
UCP320 100 215 108 42 490 380 140 275 120 36 50 35.0
UCP321 105 225 112 44 490 380 140 280 120 36 50 35.0
UCP322 110 2240 117 46 520 400 150 300 140 40 55 45.0
UCP324 120 260 126 51 570 450 160 320 140 40 55 55.0
UCP326 130 280 135 54 600 480 180 355 140 40 55 72.0
UCP328 140 300 145 59 620 500 200 390 140 40 55 89.0
                         

NO 6. Our Bearing Factory:

NO 8. Our Bearing Warehouse

NO.9Packaging&Shipping

Why Choose Us:

l Sample is available.

l We can accept OEM service.

l We have large stock of original brand and our own brand bearing.

l We have 20 years of experience in bearing manufacturing and sales

l Our company was established in 2005, mainly engaged in the research and development and manufacturing of bearings, as well as the sales of internationally renowned brands. Our products are exported to the United States, Germany, the United Kingdom, Japan, and other regions of India, and are highly praised by buyers
  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Aligning: Aligning Bearing
Separated: Unseparated
Feature: Vacuum, Magnetically, Low Temperature, Corrosion Resistant, High Temperature, High Speed
Samples:
US$ 3/Piece
1 Piece(Min.Order)

|

Order Sample

Available in blue, green, and black products
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

pillow block bearing

What challenges are associated with lubrication distribution in pillow block bearings, and how are they addressed?

Lubrication distribution in pillow block bearings can pose certain challenges, but these challenges can be effectively addressed through various methods and techniques. Here are the key challenges associated with lubrication distribution in pillow block bearings and their corresponding solutions:

  • Inadequate Lubricant Supply:
  • One common challenge is ensuring an adequate and consistent supply of lubricant to the bearing. Inadequate lubrication can lead to increased friction, heat generation, and premature wear. To address this challenge, proper lubrication procedures should be followed, including using the correct type and quantity of lubricant recommended by the bearing manufacturer. Regular lubrication inspections and monitoring can help ensure that the bearing receives sufficient lubricant to maintain optimal performance.

  • Lubricant Contamination:
  • Contamination of the lubricant can occur due to various factors, such as the ingress of dirt, dust, or moisture into the bearing housing. Contaminated lubricant can hinder proper lubrication distribution and compromise the bearing’s performance. To address this challenge, effective sealing mechanisms, such as rubber seals or labyrinth seals, are incorporated into pillow block bearings to prevent the entry of contaminants. Regular inspection and cleaning of the bearing housing and lubrication system can also help maintain a clean lubricant supply.

  • Uneven Lubrication Distribution:
  • Uneven distribution of lubricant within the bearing can lead to localized areas of high friction and increased wear. This can occur due to factors such as improper lubrication techniques, misalignment, or the presence of obstructions within the bearing housing. To address this challenge, it is crucial to follow the manufacturer’s guidelines for lubrication methods and intervals. Proper alignment of the bearing and shafts, along with regular inspection and maintenance, can help ensure even lubricant distribution and prevent premature wear.

  • Over-Lubrication:
  • Over-lubrication can be as detrimental as inadequate lubrication. Excessive lubricant can result in increased drag, higher operating temperatures, and potential leakage. It can also lead to the accumulation of contaminants within the bearing housing. To overcome this challenge, it is essential to adhere to the recommended lubrication quantities specified by the bearing manufacturer. Monitoring techniques, such as visual inspection or the use of condition monitoring tools, can help identify signs of over-lubrication and allow for adjustments to be made accordingly.

  • Lubricant Degradation:
  • Lubricants can degrade over time due to factors such as oxidation, contamination, or high operating temperatures. Degraded lubricants lose their effectiveness, leading to inadequate lubrication and increased friction. To address this challenge, regular lubricant analysis and monitoring can help determine the lubricant’s condition and identify the need for replenishment or replacement. Lubricant selection should also consider the operating conditions and temperature ranges to ensure optimal performance and longevity.

  • Automatic Lubrication Systems:
  • Pillow block bearings in certain applications benefit from the use of automatic lubrication systems. These systems provide a controlled and consistent supply of lubricant to the bearing, eliminating the challenges associated with manual lubrication. Automatic lubrication systems can be designed to deliver precise amounts of lubricant at regular intervals, ensuring optimal lubrication distribution. They can also incorporate monitoring features to detect abnormalities or malfunctions in the lubrication system and allow for timely corrective actions.

In summary, challenges associated with lubrication distribution in pillow block bearings include inadequate lubricant supply, lubricant contamination, uneven distribution, over-lubrication, lubricant degradation, and the need for precise and consistent lubrication. These challenges can be effectively addressed through proper lubrication procedures, sealing mechanisms, regular inspection and maintenance, adherence to manufacturer guidelines, monitoring techniques, lubricant analysis, and the use of automatic lubrication systems where applicable. By addressing these challenges, optimal lubrication distribution can be achieved, leading to improved performance, reduced wear, and extended bearing life.

pillow block bearing

What are the signs of wear or damage in pillow block bearings, and when should they be replaced?

Pillow block bearings can experience wear or damage over time due to various factors. It is important to monitor their condition regularly to identify signs of wear or damage and determine when replacement is necessary. The following are common signs of wear or damage in pillow block bearings and indicators for replacement:

  • Abnormal Noise:
  • If you notice unusual noises such as grinding, squeaking, or rumbling coming from the pillow block bearing, it can be an indication of wear or damage. Excessive noise often suggests that the rolling elements or the bearing raceways are worn or pitted. In such cases, the pillow block bearing should be replaced to prevent further damage and potential failure.

  • Increased Vibration:
  • An increase in vibration levels can be a sign of problems within the pillow block bearing. Excessive vibration indicates that the bearing may be worn, misaligned, or damaged in some way. If the vibration cannot be resolved through other means, it is advisable to replace the pillow block bearing to restore smooth and efficient operation.

  • Irregular Movement:
  • If the shaft supported by the pillow block bearing exhibits irregular or uneven movement, it can be a sign of bearing wear or damage. The bearing may have developed play or lost its original precision, resulting in erratic motion. In such cases, replacing the pillow block bearing is necessary to ensure proper functioning and prevent further issues.

  • Excessive Heat:
  • If the pillow block bearing becomes unusually hot to the touch during operation, it is an indication of potential problems. Excessive heat generation can result from inadequate lubrication, misalignment, or bearing damage. Continued operation under such conditions can lead to accelerated wear and premature failure. In such cases, the pillow block bearing should be replaced and the underlying causes addressed to prevent further damage.

  • Lubrication Issues:
  • Pillow block bearings require proper lubrication to ensure smooth operation and reduce friction. If there are signs of inadequate lubrication, such as dry or discolored bearing surfaces, it can lead to increased wear and potential bearing failure. If lubrication issues cannot be resolved through lubricant replenishment or maintenance, replacing the pillow block bearing may be necessary.

  • Visible Damage:
  • Inspect the pillow block bearing visually for any visible signs of damage, such as cracks, dents, or corrosion. These visible indications may suggest that the bearing has been subjected to excessive loads, contamination, or harsh operating conditions. If significant damage is observed, replacing the pillow block bearing is recommended.

It is important to note that the specific signs of wear or damage in pillow block bearings may vary depending on the type of bearing and the application. Regular monitoring, maintenance, and following the manufacturer’s guidelines are essential for identifying potential issues and determining the appropriate timing for replacement. When in doubt, consulting with a bearing specialist or qualified technician can provide valuable insights and guidance for replacing pillow block bearings.

pillow block bearing

Can you explain the design principles of pillow block bearings and their functions?

Pillow block bearings, also known as plummer block bearings, are designed based on certain principles to ensure their functionality and performance. Understanding the design principles can provide insights into how these bearings operate and fulfill their intended functions. Here’s a detailed explanation of the design principles of pillow block bearings and their functions:

  • Housing Design:
  • The housing of a pillow block bearing is typically made of cast iron or pressed steel and has a split design. The split housing allows for easy installation and maintenance by providing access to the bearing insert without the need to disassemble the entire system. The housing also includes mounting holes or slots for attaching the bearing to a support structure, such as a machine frame or conveyor system.

  • Bearing Insert:
  • The bearing insert is a key component of a pillow block bearing. It is pre-mounted inside the housing and provides the rotating element to support shafts or other moving parts. The design of the bearing insert depends on the specific application requirements. Common types of bearing inserts used in pillow block bearings include deep groove ball bearings, spherical roller bearings, and cylindrical roller bearings. The selection of the appropriate bearing insert depends on factors such as load capacity, speed, and environmental conditions.

  • Self-Aligning Capability:
  • Pillow block bearings are designed with a certain degree of self-aligning capability. This means that they can accommodate slight misalignments or shaft deflections without causing undue stress on the bearing or affecting its performance. The self-aligning capability is achieved through the design of the bearing insert and the housing. It helps to ensure smooth operation, reduce wear, and prolong the bearing’s service life.

  • Load Support:
  • Pillow block bearings are primarily designed to support rotating shafts and transmit loads between the shaft and the housing. They are capable of handling both radial and axial loads, depending on the type of bearing insert used. The design of the bearing insert and the housing is optimized to provide optimal load-carrying capacity and distribute the loads evenly, minimizing stress concentrations and maximizing the bearing’s performance.

  • Lubrication:
  • Lubrication is crucial for the proper functioning and longevity of pillow block bearings. The housing design often includes provisions for grease or oil lubrication. Lubrication helps to reduce friction, dissipate heat, prevent wear, and protect against corrosion. Proper lubrication ensures smooth operation, minimizes power losses, and extends the service life of the bearing.

  • Environmental Protection:
  • Pillow block bearings are designed to provide a degree of environmental protection to the bearing insert. The housing acts as a shield, preventing contaminants such as dust, dirt, and moisture from entering the bearing and causing premature failure. The housing design may include features such as seals or shields to further enhance the protection against contaminants. This design principle helps to maintain the integrity of the lubrication and ensure reliable operation in various working environments.

In summary, pillow block bearings are designed based on certain principles to ensure their functionality and performance. The housing design allows for easy installation and maintenance, while the bearing insert provides the rotating element to support shafts and transmit loads. The self-aligning capability accommodates misalignments, and the optimized design of the bearing insert and housing ensures proper load support. Lubrication and environmental protection features contribute to smooth operation and extended service life. Understanding these design principles helps in selecting and utilizing pillow block bearings effectively in various industrial applications.

China OEM Stainless Steel Waterproof Pillow Block Bearing   connecting rod bearingChina OEM Stainless Steel Waterproof Pillow Block Bearing   connecting rod bearing
editor by CX 2024-05-07

China best Good Quality Plastic Housing T210 Stainless Steel Pillow Block Bearings bearing driver

Product Description

Good quality plastic housing T210 stainless steel pillow block bearings
Product Description:   

Pillow block bearings is actually a variant of deep groove ball bearings, is characterized by its outer diameter surface of the sphere, you can play with the corresponding inner concave spherical bearing self-aligning effct. 

 

Type Pillow Block Bearing
Bearing Item UCFL200 UCFL300
Insert bearing UC200,UC300,SA200,SB200,UK200,SER200
Bearing materia 100% chrome steel GCR-15
Housing materia Cast iron,stainless steel, plastic resin
Row number Single row bearing

 

UCP204
UCP205
UCP206
UCP207
UCP208
UCP209
UCP210
UCP211
UCP212
UCP213
UCP214
UCP215
UCP216
UCP217
UCP218
UCFL204
UCFL205
UCFL206
UCFL207
UCFL208
UCFL209
UCFL210
UCFL211
UCFL212
UCFL213
UCFL214
UCFL215
UCFL216
UCFL217
UCFL218
UCF204
UCF205
UCF206
UCF207
UCF208
UCF209
UCF210
UCF211
UCF212
UCF213
UC214
UCF215
UCF216
UC217
UCF218
UCFC204
UCFC205
UCFC206
UCFC207
UCFC208
UCFC209
UCFC210
UCFC211
UCFC212
UCFC213
UCFC214
UCFC215
UCFC216
UCFC217
UCFC218
UCT204
UCT205
UCT206
UCT207
UCT208
UCT209
UCT210
UCT211
UCT212
UCT213
UCT214
UCT215
UCT216
UCT217
UCT218
UCPA204
UCPA205
UCPA206
UCPA207
UCPA208
UCPA209
UCPA210
UCPA211
UCPA212
UCPA213
UCPA214
UCPA215
UCPA216
UCPA217
UCPA218
UCHA204
UCHA205
UCHA206
UCHA207
UCHA208
UCHA209
UCHA210
UCHA211
UCHA212
UCHA213
UCHA214
UCHA215
UCHA216
UCHA217
UCHA218
UC204
UC205
UC206
UC207
UC208
UC209
UC210
UC211
UC212
UC213
UC214
UC215
UC216
UC217
UC218
SA/SB/UK204
SA/SB/UK205
SA/SB/UK206
SA/SB/UK207
SA/SB/UK208
SA/SB/UK209
SA/SB/UK210
SA/SB/UK211
SA/SB/UK212
SA/SB/UK213
SA/SB/UK214
SA/SB/UK215
SA/SB/UK216
SA/SB/UK217
SA/SB/UK218

Pillow  block bearing mainly used to bearadical load mainly radial and axial joint load, generally should not alone bear the axial load ,such a bearing inner and outer ring can be installed separately.

Company information:
Guanxian Xinyan Pillow Block Bearing Co.,ltd. is based in ZheJiang (CHINA) since 2011 and is 1 of the biggest authorized manufactures and exporters of bearing. We’ve been dedicated to provide all types of hiigh quality bearings to OEM, Retailers and traders throughout international market since the moment established. Pillow block bearings, bearings housing,insert bearings and deep groove ball bearings are all we specialized. We are also developing nonstandard bearings as per the drawings from customers. 
Up to now, we have exported our goods to Italy, Brazil, Argentina, Poland, India, Pakistan, Bangladesh,Thailand etc. First class service, efficient delivery methods, the most competitive quality-price ratio, we dedicated to provide you quality brand bearings. Sincerely welcome new and old customers visit and build cooperation.

Packing :
Single box + cartons + pallets or as your requirements.

Shipping:
By Air  / By Sea /By Express

a. For small weight or Urgent, goods will be delivery   
     by Express DHL/FedEX/UPS/TNT/EMS
 b.For max production,goods will be shipped by sea/by air.
c.According to your requirements

FAQ:
Why choose BXY?
Quality, loyalty and service is our faith!
Deemed continuous improvement as our permanent pursuits.
Q1.: How many the MOQ of your company?
A1.: Our company MOQ is 1pcs.

Q2.: Could you accept OEM and customize?
A2.:YES, we can customize for you according to sample or drawing.

Q3.: Could you supply sample for free?
A3.: Yes, we can supply sample for free, but need our customer afford freight.

Q4. : Does your factory have CE?
A4.: Yes, we have ISO 9001:2008, and SASO. If you want other CE, we can do for you.

Q5.: Is it your company is factory or Trade Company?
 A5.: We have our own factory; our type is factory + trade.

Q6.:  What time the guarantee of your bearing quality guarantee period:?
A6.: 6 months ,Customer need supply photos and send bearing back.

Q7.: Could you tell me the payment term of your company can accept?
A7.: T/T, Western Union, PayPal, T/T, L/C

Q8.: Could you tell me the delivery time of your goods?
A8.: 7-15 days , mostly base on your order quantity  

If  you have any problems pls feel free to contact with me, thank you.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Rolling Body: Ball Bearings
The Number of Rows: Single
Outer Dimension: Medium and Large(120-190mm)
Material: Bearing Steel
Spherical: Non-Aligning Bearings
Load Direction: Axial Bearing
Customization:
Available

|

Customized Request

pillow block bearing

How do pillow block bearings contribute to the proper functioning of food processing equipment?

Pillow block bearings play a crucial role in ensuring the proper functioning of food processing equipment. They provide reliable support and smooth operation for rotating shafts and components in various stages of food processing. Here are the key contributions of pillow block bearings to the proper functioning of food processing equipment:

  • Sanitary Design:
  • In food processing environments, maintaining strict hygiene standards is essential. Pillow block bearings designed for food processing equipment are constructed with materials and features that adhere to sanitary requirements. They are often made from stainless steel or other corrosion-resistant materials that are easy to clean and withstand frequent washdowns. Additionally, these bearings have smooth surfaces, rounded edges, and minimal crevices to prevent the accumulation of food particles, debris, or bacteria. The sanitary design of pillow block bearings ensures the integrity and cleanliness of the equipment, minimizing the risk of contamination and ensuring compliance with food safety regulations.

  • Reliable Performance:
  • Food processing equipment operates under demanding conditions, including high production rates, heavy loads, and frequent start-stop cycles. Pillow block bearings are designed to withstand these challenges and provide reliable performance. They offer excellent load-bearing capacity, shock resistance, and vibration damping capabilities. This ensures smooth and stable operation of rotating shafts, reducing the risk of equipment failure, downtime, and production interruptions. By contributing to the reliable performance of food processing equipment, pillow block bearings support efficient and uninterrupted food processing operations.

  • Corrosion Resistance:
  • Food processing environments often involve exposure to moisture, chemicals, and cleaning agents. Pillow block bearings designed for food processing equipment are highly resistant to corrosion and chemical attack. They are made from materials that can withstand the corrosive effects of food acids, cleaning solutions, and other substances encountered in the processing area. The corrosion resistance of these bearings helps maintain their structural integrity, extends their lifespan, and ensures reliable performance even in harsh operating conditions.

  • Contamination Prevention:
  • Preventing contamination is of utmost importance in food processing. Pillow block bearings incorporate sealing mechanisms, such as rubber seals or labyrinth seals, to prevent the entry of contaminants into the bearing housing. These seals provide a barrier against dirt, dust, moisture, and other external elements, minimizing the risk of contamination of the food products. The effective sealing of pillow block bearings helps maintain the cleanliness and purity of the processing environment, safeguarding the quality and safety of the food products.

  • Easy Maintenance:
  • Maintenance and cleanliness are critical in food processing equipment. Pillow block bearings are designed for easy maintenance, inspection, and cleaning. They often have features such as grease fittings or lubrication access points that facilitate the replenishment of lubricants without disassembling the bearing. This simplifies routine maintenance tasks and allows for timely lubrication, ensuring optimal bearing performance. The ease of maintenance of pillow block bearings contributes to the overall efficiency and reliability of food processing equipment.

  • Versatility:
  • Food processing equipment encompasses a wide range of applications, such as mixing, grinding, conveying, and packaging. Pillow block bearings offer versatility and can be used in various equipment types and configurations. They are available in different sizes, load capacities, and mounting options to accommodate the specific requirements of different food processing applications. The versatility of pillow block bearings allows for their integration into diverse equipment designs, supporting the proper functioning of food processing machinery.

In summary, pillow block bearings contribute to the proper functioning of food processing equipment by offering a sanitary design, ensuring reliable performance, providing corrosion resistance, preventing contamination, enabling easy maintenance, and offering versatility. By fulfilling these roles, pillow block bearings support the efficient, hygienic, and uninterrupted operation of food processing equipment while maintaining the highest standards of food safety and quality.

pillow block bearing

Are there specific maintenance practices that can extend the lifespan of pillow block bearings?

Yes, there are specific maintenance practices that can help extend the lifespan of pillow block bearings. By following these practices, you can optimize the performance, reliability, and longevity of the bearings. Here are some essential maintenance practices for pillow block bearings:

  • Regular Inspection:
  • Perform regular inspections of the pillow block bearings to check for any signs of wear, damage, or contamination. Inspect the bearing housing, seals, lubrication, and any visible components. Regular inspections help identify issues early on and allow for timely maintenance or replacement.

  • Lubrication:
  • Proper lubrication is crucial for the smooth operation of pillow block bearings. Follow the manufacturer’s recommendations for the type of lubricant and the appropriate lubrication intervals. Ensure that the bearing is adequately lubricated to reduce friction, prevent excessive wear, and protect against corrosion.

  • Cleanliness:
  • Maintain cleanliness in the surrounding area of pillow block bearings to prevent the entry of contaminants. Keep the bearing housing clean and free from dirt, dust, and debris that can cause damage or hinder smooth operation. Regularly clean the bearing housing and seals as part of your maintenance routine.

  • Alignment:
  • Ensure proper alignment of the pillow block bearings and the associated components. Misalignment can lead to increased stress, vibration, and premature wear. Align the bearings according to the manufacturer’s specifications and make adjustments as necessary to maintain proper alignment.

  • Temperature Monitoring:
  • Monitor the operating temperature of the pillow block bearings. Excessive heat can indicate potential issues such as inadequate lubrication or bearing damage. Continuously high temperatures can accelerate wear and reduce the lifespan of the bearings. Regularly check the temperature and address any abnormal readings promptly.

  • Training and Documentation:
  • Provide proper training to personnel responsible for the maintenance of pillow block bearings. Ensure they understand the correct procedures for inspection, lubrication, and other maintenance tasks. Maintain documentation of maintenance activities, including lubrication schedules, inspections, and any repairs or replacements, for reference and tracking purposes.

  • Replacement when Necessary:
  • Finally, it is important to replace pillow block bearings when they show signs of significant wear, damage, or have reached their expected lifespan. Continuing to operate with worn or damaged bearings can lead to failures, production disruptions, and potential safety hazards. Follow the manufacturer’s recommendations and consult with bearing specialists or technicians to determine the appropriate timing for replacement.

By implementing these maintenance practices, you can extend the lifespan of pillow block bearings, improve their performance, and minimize the risk of unexpected failures. Regular inspections, proper lubrication, cleanliness, alignment, temperature monitoring, training, documentation, and timely replacement are key factors in ensuring the longevity and efficient operation of pillow block bearings.

pillow block bearing

What are the common applications and industries where pillow block bearings are commonly used?

Pillow block bearings are widely used in various applications and industries where there is a need to support rotating shafts or other moving parts. These bearings offer versatility, ease of installation, and reliable performance. Here’s a detailed explanation of the common applications and industries where pillow block bearings are commonly used:

  • Industrial Machinery:
  • Pillow block bearings find extensive use in industrial machinery across different sectors. They are commonly employed in conveyor systems, packaging machinery, material handling equipment, printing presses, textile machinery, and food processing equipment. These bearings provide support and smooth rotation for shafts, pulleys, rollers, and other components, contributing to the efficient operation of the machinery.

  • Agricultural Equipment:
  • In the agricultural industry, pillow block bearings are utilized in various equipment such as tractors, combines, harvesters, and irrigation systems. They are used to support rotating elements like shafts, wheels, pulleys, and augers. Pillow block bearings help withstand heavy loads, provide reliable operation, and ensure the longevity of agricultural machinery under challenging field conditions.

  • Mining and Quarrying:
  • Pillow block bearings are employed in mining and quarrying operations where heavy-duty equipment is used. They are utilized in crushers, screens, conveyors, and vibrating equipment. These bearings can handle high loads and harsh operating conditions, making them suitable for the demanding environments encountered in mining and quarrying applications.

  • Construction and Building:
  • Pillow block bearings play a vital role in the construction and building industry. They are commonly used in concrete mixers, cranes, hoists, elevators, and escalators. These bearings provide support and enable smooth movement for various components and systems involved in construction and building processes.

  • Automotive and Transportation:
  • Pillow block bearings are utilized in automotive and transportation applications. They are used in commercial vehicles, buses, trucks, and trailers. These bearings support rotating shafts, wheels, and suspension systems, ensuring smooth operation and reducing friction and wear in automotive and transportation equipment.

  • Power Generation:
  • The power generation industry relies on pillow block bearings for applications such as turbines, generators, pumps, and fans. These bearings provide support and rotational motion for various components in power generation systems. They are designed to handle high temperatures, heavy loads, and high-speed operations commonly encountered in power plants.

  • HVAC and Refrigeration:
  • Pillow block bearings are commonly used in heating, ventilation, air conditioning (HVAC), and refrigeration systems. They are employed in fans, blowers, compressors, and pumps. These bearings ensure smooth and efficient operation of HVAC and refrigeration equipment, contributing to the comfort and functionality of residential, commercial, and industrial buildings.

These are just a few examples of the many applications and industries where pillow block bearings are commonly used. The versatility and reliability of these bearings make them indispensable in numerous fields, where they provide essential support and rotational motion for various machinery and equipment.

China best Good Quality Plastic Housing T210 Stainless Steel Pillow Block Bearings   bearing driverChina best Good Quality Plastic Housing T210 Stainless Steel Pillow Block Bearings   bearing driver
editor by CX 2024-04-11

China factory Pillow Block Ball Bearing with Cast Iron Housing, Stainless Steel Insert Bearing Unit (UC/SA/SB/UK/UCP/UCF/UCT/UCFC/UCFL/UCPA/UCHA/UCPH) bearing driver

Product Description

Pillow Block Ball Bearing with Cast Iron Housing, Stainless Steel Insert Bearing Unit (UC/SA/SB/UK/UCP/UCF/UCT/UCFC/UCFL/UCPA/UCHA/UCPH)


Product Description

Bearing items: UCP200  UCPX00   UCP300

Product packing: Plastic bag

  

 

  

  

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Aligning: Aligning Bearing
Separated: Separated
Rows Number: Single
Raceway: Crowned Raceway
Material: Bearing Steel
Bearing Block Model: P
Customization:
Available

|

Customized Request

pillow block bearing

What considerations are important when selecting the appropriate size and housing material for a pillow block bearing?

When selecting the appropriate size and housing material for a pillow block bearing, several considerations are important to ensure optimal performance and reliability. Here are the key factors to consider:

  • Load Capacity:
  • Determine the anticipated load that the pillow block bearing will be subjected to. Consider both the magnitude and direction of the load. This information is crucial for selecting a bearing with the appropriate load capacity. It ensures that the bearing can handle the applied loads without premature wear or failure.

  • Shaft Size and Fit:
  • Take into account the size and tolerance of the shaft that the bearing will be mounted on. The bearing and shaft should have compatible dimensions and proper fit. Consider factors such as shaft diameter, tolerance, and shape to ensure a secure and accurate fit between the bearing and the shaft.

  • Operating Speed:
  • Understand the expected operating speed of the application. Different pillow block bearings are designed to handle specific speed ranges. Ensure that the selected bearing’s speed rating is suitable for the anticipated operating conditions. Operating the bearing within its speed limitations prevents excessive heat generation and premature failure.

  • Environmental Conditions:
  • Evaluate the environmental factors that the pillow block bearing will be exposed to. Consider aspects such as temperature extremes, humidity, dust, chemicals, and potential contaminants. Choose a bearing and housing material that can withstand the specific environmental conditions to ensure long-term durability and optimal performance.

  • Corrosion Resistance:
  • If the application is exposed to corrosive elements, select a pillow block bearing with appropriate corrosion resistance. Stainless steel or other corrosion-resistant materials may be necessary to prevent degradation and maintain the functionality of the bearing in such environments.

  • Housing Material:
  • Consider the housing material for the pillow block bearing. Common housing materials include cast iron, stainless steel, thermoplastic, and composite materials. The choice of housing material depends on factors such as load requirements, environmental conditions, corrosion resistance, and cost considerations. Each housing material has its own advantages and limitations, so select the most suitable material for the specific application.

  • Lubrication:
  • Identify the lubrication requirements of the pillow block bearing. Some bearings may require periodic lubrication, while others are designed to be maintenance-free or self-lubricating. Consider the availability of lubrication access points and the ease of lubrication when selecting the bearing and housing. Proper lubrication ensures smooth operation, reduces friction, and extends the bearing’s lifespan.

By carefully considering these factors when selecting the appropriate size and housing material for a pillow block bearing, you can ensure compatibility, performance, and longevity in the specific application. Consulting with bearing manufacturers, engineers, or industry experts can provide valuable guidance in making the optimal selection for your specific requirements.

pillow block bearing

How do different types of pillow block bearings, like split and solid, differ in terms of design and functionality?

Different types of pillow block bearings, such as split and solid designs, exhibit variations in their design and functionality. Here’s a detailed explanation of how these types differ:

  • Split Pillow Block Bearings:
  • Split pillow block bearings, also known as split plummer block bearings, are designed with a split housing that allows for easy mounting and dismounting without the need to remove other components or disassemble the shaft. The housing is divided into two or more parts, typically split horizontally or vertically, which can be separated to access the bearing. The split design offers several advantages:

    • Easy Installation and Maintenance: Split pillow block bearings simplify the installation and maintenance process by providing convenient access to the bearing without dismantling the shaft or surrounding equipment. This feature is particularly beneficial in scenarios where quick and efficient bearing replacement or inspection is required.
    • Space Constraints: Split bearings are advantageous in applications where space limitations make it challenging to maneuver or remove solid bearings. The split design allows for easy insertion and removal of the bearing, even in confined spaces.
    • Shaft Alignment: Split pillow block bearings often incorporate features that assist with shaft alignment. This ensures proper alignment between the rotating shaft and the bearing, reducing friction, wear, and vibration.
    • Temperature Expansion: The split housing design accommodates thermal expansion or contraction of the bearing components. This capability is particularly important in applications where temperature variations occur, preventing potential damage or misalignment due to thermal effects.
  • Solid Pillow Block Bearings:
  • Solid pillow block bearings, also referred to as solid plummer block bearings, have a one-piece housing that encloses the bearing. The housing is typically made of cast iron, ductile iron, or other durable materials. Solid pillow block bearings offer the following characteristics:

    • Stability and Strength: Solid bearings provide a robust and rigid housing, offering excellent stability and support for the bearing and the shaft. They are capable of handling high loads and resisting deformation or deflection under heavy operating conditions.
    • Environmental Protection: The solid housing design provides enhanced protection against contaminants, moisture, and debris. It helps to shield the bearing from external elements, reducing the risk of premature wear, corrosion, or damage.
    • Sealing Options: Solid pillow block bearings often feature various sealing options, such as rubber seals, felt seals, or labyrinth seals. These seals help to retain the lubricant and prevent the ingress of contaminants, maintaining the integrity and performance of the bearing.
    • Design Variations: Solid bearings are available in different configurations and styles to accommodate specific application requirements. This includes variations in the shape, dimensions, mounting methods, and sealing arrangements of the housing.

In summary, split pillow block bearings and solid pillow block bearings differ in their design and functionality. Split bearings offer easy installation and maintenance, space-saving advantages, assistance with shaft alignment, and accommodation for temperature expansion. On the other hand, solid bearings provide stability, strength, environmental protection, sealing options, and various design variations. The choice between these types depends on the specific application needs, including accessibility requirements, load capacity, environmental conditions, and maintenance considerations.

pillow block bearing

Can you explain the design principles of pillow block bearings and their functions?

Pillow block bearings, also known as plummer block bearings, are designed based on certain principles to ensure their functionality and performance. Understanding the design principles can provide insights into how these bearings operate and fulfill their intended functions. Here’s a detailed explanation of the design principles of pillow block bearings and their functions:

  • Housing Design:
  • The housing of a pillow block bearing is typically made of cast iron or pressed steel and has a split design. The split housing allows for easy installation and maintenance by providing access to the bearing insert without the need to disassemble the entire system. The housing also includes mounting holes or slots for attaching the bearing to a support structure, such as a machine frame or conveyor system.

  • Bearing Insert:
  • The bearing insert is a key component of a pillow block bearing. It is pre-mounted inside the housing and provides the rotating element to support shafts or other moving parts. The design of the bearing insert depends on the specific application requirements. Common types of bearing inserts used in pillow block bearings include deep groove ball bearings, spherical roller bearings, and cylindrical roller bearings. The selection of the appropriate bearing insert depends on factors such as load capacity, speed, and environmental conditions.

  • Self-Aligning Capability:
  • Pillow block bearings are designed with a certain degree of self-aligning capability. This means that they can accommodate slight misalignments or shaft deflections without causing undue stress on the bearing or affecting its performance. The self-aligning capability is achieved through the design of the bearing insert and the housing. It helps to ensure smooth operation, reduce wear, and prolong the bearing’s service life.

  • Load Support:
  • Pillow block bearings are primarily designed to support rotating shafts and transmit loads between the shaft and the housing. They are capable of handling both radial and axial loads, depending on the type of bearing insert used. The design of the bearing insert and the housing is optimized to provide optimal load-carrying capacity and distribute the loads evenly, minimizing stress concentrations and maximizing the bearing’s performance.

  • Lubrication:
  • Lubrication is crucial for the proper functioning and longevity of pillow block bearings. The housing design often includes provisions for grease or oil lubrication. Lubrication helps to reduce friction, dissipate heat, prevent wear, and protect against corrosion. Proper lubrication ensures smooth operation, minimizes power losses, and extends the service life of the bearing.

  • Environmental Protection:
  • Pillow block bearings are designed to provide a degree of environmental protection to the bearing insert. The housing acts as a shield, preventing contaminants such as dust, dirt, and moisture from entering the bearing and causing premature failure. The housing design may include features such as seals or shields to further enhance the protection against contaminants. This design principle helps to maintain the integrity of the lubrication and ensure reliable operation in various working environments.

In summary, pillow block bearings are designed based on certain principles to ensure their functionality and performance. The housing design allows for easy installation and maintenance, while the bearing insert provides the rotating element to support shafts and transmit loads. The self-aligning capability accommodates misalignments, and the optimized design of the bearing insert and housing ensures proper load support. Lubrication and environmental protection features contribute to smooth operation and extended service life. Understanding these design principles helps in selecting and utilizing pillow block bearings effectively in various industrial applications.

China factory Pillow Block Ball Bearing with Cast Iron Housing, Stainless Steel Insert Bearing Unit (UC/SA/SB/UK/UCP/UCF/UCT/UCFC/UCFL/UCPA/UCHA/UCPH)   bearing driverChina factory Pillow Block Ball Bearing with Cast Iron Housing, Stainless Steel Insert Bearing Unit (UC/SA/SB/UK/UCP/UCF/UCT/UCFC/UCFL/UCPA/UCHA/UCPH)   bearing driver
editor by CX 2024-04-10

China High Perfomance Sucfc204 Stainless Steel Pillow Bearing Pillow Block Bearing drive shaft bearing

Merchandise Description

ZheJiang HangZhou Jiuding stainless steel goods investing Co., Ltd. has established a professional product sales network to aid buyers acquire merchandise details at any time.  We are the supplier and producer of stainless metal outer spherical bearing pillow block in Dayan Town, HangZhou town, China.  The organization integrates research and growth, manufacturing and domestic export of outer spherical bearing seat.  We continually try to produce progressive advancement, adhere to the “high quality of survival” principle to give top quality services.  Our workers get expert coaching.  The business has sturdy technical drive, advanced processing equipment, comprehensive screening equipment, to make sure the good quality of bearing, assistance to program customized processing.  

US $4.6-30.5
/ Piece
|
100 Pieces

(Min. Order)

###

Aligning: Aligning Bearing
Separated: Separated
Feature: Corrosion Resistant
Rows Number: Multiple
Raceway: Spherical Raceway
Material: Stainless Steel

###

Samples:
US$ 10/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
US $4.6-30.5
/ Piece
|
100 Pieces

(Min. Order)

###

Aligning: Aligning Bearing
Separated: Separated
Feature: Corrosion Resistant
Rows Number: Multiple
Raceway: Spherical Raceway
Material: Stainless Steel

###

Samples:
US$ 10/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

Advantages and disadvantages of different types of bushings

Bushings are a simple but essential part of machinery with sliding or rotating shaft assemblies. This type of bearing is used in a wide variety of industries because its high load-carrying capacity and excellent anti-friction properties make it a necessity for construction, mining, hydropower, transportation and agricultural machinery. In addition to these applications, bushings also play a vital role in material handling and food processing. This article explores the various types of bushings available.
bushing

air casing

The air bushing forms a frictionless cylinder that applies the load to the rotating object. Bushings are used to measure torque and provide self-centering force in applications where linear motion is critical. The following are load equations that can be used to select the appropriate air sleeve for your application. To learn more about these air sleeves, read on. This article discusses the benefits and uses of air bushings in linear motion.
Bushings have many advantages over bearings. They are not prone to wear and corrosion. Unlike bearings, they can easily bypass conversion and inspection periods. Their high-quality design guarantees reliable machine performance, yet they are inexpensive and easy to replace. In many industries, air compressors are essential for sports. The air bushing eliminates friction, allowing the compressor to work more efficiently. They can also help eliminate the need for frictionless bearings and improve the overall efficiency of the machine.
Another type of air bearing is the cylindrical bushing. These are used for linear and aerostatic motion. Their low friction properties allow them to support radial loads without wearing out or damaging components. They are usually used for normal sized shafts. Air bushings have several components that can be used with other types of air bearings. Cylindrical air bearings have four o-ring grooves that allow them to be inserted into the structure. They are often used with other types of air bearings for smoother motion.

rubber bushing

If you’re looking to buy a new suspension system, you may be wondering if rubber or polyurethane is the right choice. Rubber is less expensive, but not without its drawbacks. Polyurethane is more durable and offers better handling and suspension. Rubber bushings also reduce road feel, while polyurethane isolates the driver from the road. Both materials will help you improve handling and alignment, but each has advantages and disadvantages.
Typically, rubber bushings are cylindrical components with metal inner and outer surfaces. These metals can be stainless steel, mild steel or aluminum. They are usually stress relieved and prestressed for maximum durability. They are designed to meet the exact specifications of a specific application. For example, shock-absorbing rubber bushings are cushioning pads made of polyurethane that absorb road bumps and noise.
Unlike polyurethane, rubber suspension bushings have a shorter lifespan than polyurethane. This is because rubber is more susceptible to damage from UV rays, road chemicals and oils. The rubber also stretches and warps due to the pressure of the road. The rubber bushing also squeaks, which can be cause for concern. But if the noise persists for a long time, it may be a sign that your vehicle needs a new suspension system.
The main reason why cars use rubber bushings is for shock absorption. During machine use, vibration and noise caused by the movement of parts can cause serious damage. To prevent this, rubber bushings act as shock absorbers and damping agents. Rubber bushings are an excellent choice for automakers, but they are also used in a variety of industrial settings.
bushing

Polyurethane bushing

If you want to make your vehicle handle better, polyurethane bushings may be the answer. They come in different shapes and sizes and can improve a wide range of areas. This article will explore the advantages and disadvantages of polyurethane bushings and their potential place in your car. However, before you decide to upgrade your suspension, you should understand the various advantages and disadvantages of polyurethane bushings.
The main difference between a polyurethane bushing and a rubber bushing is how the bushing rides on the suspension arm. Polyurethane bushings do not have faces that slide against each other like rubber bushings. This means they allow for more rotation and flexion, as well as consistent alignment of the control arms. Polyurethane bushings require lubrication, but only need to be lubricated every five years, much longer than equivalent rubber bushings.
Another difference between polyurethane and rubber bushings is hardness. The former has the least elasticity and is generally the most suitable for street use. While rubber bushings provide the best NVH quality, they are also notorious for changing suspension geometry. Rubber is known to be an excellent choice for street use, but polyurethane has a lifespan that far outlasts rubber.

bronze bushing

There are two main types of bronze bushings, sintered and cast. The latter require additional lubrication and are typically used in applications where powder metal products cannot be secured. The former is cheaper than the latter, but the process is more expensive. Bronze bushings can be used in environments where the material will be exposed to high temperature and vibration. For these reasons, the production process is relatively slow and expensive.
The strength of bronze is the main reason why they are so popular. Brass is a softer metal that deforms and corrodes easily. The bronze casing can withstand continuous immersion in water and can last for hundreds of years with little or no maintenance. However, it is important to note that this metal is not resistant to aggressive chemicals and requires regular maintenance to keep it in good condition.
Bronze bushings offer many advantages, including durability and aesthetics. Bronze bushings are available in a variety of sizes and can be ordered in imperial and metric sizes. They can be built to your specifications and are very durable. You can even custom order them if you want. And because they can be customized, they are an excellent choice for high-end applications. The quality of the bronze bushings is second to none.

Plastic bushing

Engineered composite plastic bushings have been shown to last longer than bronze bushings and have also been found to reduce maintenance costs by up to 40%. Plastic bushings have become the first choice for thousands of applications, including medical equipment, food processing machinery, pumps, and more. Bronze bushings are oil-impregnated, but their performance is limited by their inherent weaknesses: oil-impregnated bronze tends to develop high levels of capillary action and requires rotational motion to maintain an intact oil film. Low speed and intermittent use of bronze bushings can also hinder the ability of the lubricant to provide adequate lubrication.
Advantages of plastic bushings over metal include low friction, non-reactive surfaces, and long life. CZPT offers a variety of engineering plastics that outperform traditional metals in a range of applications. For example, nylon bushings resist wear while requiring little lubrication. In addition, polymer-shaped plastics are lightweight and highly resistant to aggressive cleaning agents and chemicals.
Besides being less expensive than metal bushings, plastic bushings offer many other advantages. They are very durable, have a low coefficient of friction, and are more wear-resistant than metal. Unlike metal, plastic bushings do not require lubrication and do not absorb dust and oil like metal bushings. They are lightweight, easy to maintain and last longer. This makes them an excellent choice for many applications.
bushing

Sleeve bearing

Sleeve bearings are simple pipes with matching components. They facilitate linear motion by absorbing friction and vibration. They can withstand heavy loads and work at high temperatures for long periods of time. Flange bearings are similar to sleeve bearings, but are enclosed and rotated in a housing unit. Sleeve bearings have higher load-carrying capacity and resistance to shock loads. Furthermore, they are lightweight and low cost.
Another name for sleeve bearings is babbitt radial bearings. These bearings are usually made of bronze and have straight inner and outer diameters. They are also impregnated with oil and can withstand radial loads. Typical uses for sleeve bearings are agriculture, automotive and machine tools. Sleeves can also be solid or cored material, depending on the intended use.
The type of sleeve bearing used in the bushing is important in determining which type of bushing to buy. Sleeve bearings are sized based on pressure and speed considerations. Typically, the PV limit is an upper bound on the combined pressure and velocity for a given casing material. In some cases, the sleeve bearing used in the bushing is the same as the plain bearing.
Sleeve bearings are simple in design and made from a variety of materials, including bronze and plastic. They are more affordable than metal, but plastic is still not inaudible. Plastic sleeve bearings will rattle like metal bearings if the gap between the two bushings is not accurate. Additionally, high temperature electronic painting can permanently thin the casing. The stainless steel backing provides a good surface for electronic painting and enhances abrasion resistance.

China High Perfomance Sucfc204 Stainless Steel Pillow Bearing Pillow Block Bearing     drive shaft bearingChina High Perfomance Sucfc204 Stainless Steel Pillow Bearing Pillow Block Bearing     drive shaft bearing
editor by czh 2023-01-28

China UCP Ucf UCFL Plastic Stainless Steel Tansmission Parts Spherical Pillow Block Bearing bearing block

Item Description

Different types of bearing housings

 
1)Pillow blocks – these include UCP, HCP, UCLP, UKP, UCPX, and UKPX. 
These mounted bearings are used when support for a rotating shaft axis is required. Their design enables them to support the shaft in operations where the mounting surface is parallel to the shaft axis. 

 

2)Flange type- includes UCF, HCF, UKF, UCFX, UKFX, UCFU, UCFC, UKFC, UCFS, UCFL, UKFL, UCFT. 
The flange type bearing housing comes in various shapes and styles such as square, round, and rhombus flange types. 

 

three)Just take-up units type – UCT, HCT, and UKT. 
These bearing housings have an inner surface which is concave sphered hence the bearing used has a convex sphered outer surface. They are designed to permit moderate initial misplacement. Widely used in conveyor chains and conveyor belts. A sliding slot at the side of the housing facilitates the free movement of the unit. 

 

four)Cartridge type – UCC, HCC, and UKC.
This type of bearing housing has a cylindrical outer perimeter hence the bearing outer bore is spherical. The entire unit allows free movement in the axial direction and is self-aligning. This type can be used as free side bearings for long shafts because they are capable of accommodating shaft expansion or contraction due to temperature differences. Also suitable where there is adjustment of the axial direction is required. 

 

5)Light duty types  SAFD, SBFD, SAFW, SBFW, SALF, and SBLF. 
six)Pillow block Components:  Regular Steel,Stainless Steel,Plastic

 

 

 

Price is very competitive,Quality is secure. pls inquiry.

FAQ
 

Q:  Where to uncover Other bearings ?

 

Uncover the Homepage—–> Products

 

Q: HOW TO Decide on A BEARING?

To appropriately pick a ball bearing, the critical issue is to just take into account a number of parameters:

 

 

 

one. Its software

Bearings are just about everywhere and as a result their purposes are different:

  • – Agriculture

     

    Do you favor that we remind you ?

    Quick and totally free call/e mail back

    2nd phase: the exterior diameter of the bearing

    •  
    • A / Set your bearing on the grid as shown in the diagram.
    •  
    • B / Mark the define of the outer ring. For much more ease, use a pencil with a fine level.
    •  
    • C / For simplicity of reading, do not be reluctant to attract strains to the axes and then just take the measurement.

     

     

     

     

    3rd action: the thickness of the bearing

    •  
    • A / In the very same way as for the outer diameter and the bore, location your bearing on the edge on the grid as revealed in the diagram.
    • B / Attract the outer contour.
    •  
    • C / For simplicity of reading through, do not hesitate to attract strains to the axes and then take the measurement.

     

    Summary :

    You now have 3 measuring components that will permit you to determine your bearing: the inside diameter (or bore), the outside the house diameter, and the thickness.

    You can postpone these measurements in our bearing search instrument on our site

    FAQ

     1.How many is the MOQ of your company?
       Our company MOQ is 1pcs.
     

    two.Could you accept OEM and customize?
       YES, OEM is accepted and we can customize for you according to sample or drawing. 

     

    3.How do you guaranee the good quality?
    Appraise the samples and drawings prior to manufacturing
    Evaiate the generation process,and subsequent it in schedual,guarantee the delievery time in time.
    Evaluate the bearing dimension,clearance,sound,rotations of closing productions.
    Evaluate the fause merchandise,block it and make an boost motion.
     

     

    4.Do you have shares?
       YES, we have most of the bearings exhibiting on created in china in stock,remember to speak to us for buy particulars.

     

    5.Do you have only Hubs Wheel Automobile Bearing?

        Of course,we have far more other people kinds bearings,ANY BEARING YOU CAN Think OF NOW,WE HAVE!

     

     

    US $0.1-0.5
    / Piece
    |
    1,000 Pieces

    (Min. Order)

    ###

    Aligning: Non-Aligning Bearing
    Separated: Unseparated
    Feature: Vacuum, Magnetically, Low Temperature, Corrosion Resistant, High Temperature, High Speed
    Rows Number: Single
    Raceway: Deep Groove Raceway
    Material: Stainless Steel

    ###

    Samples:
    US$ 1/Piece
    1 Piece(Min.Order)

    |
    Request Sample

    ###

    Customization:
    US $0.1-0.5
    / Piece
    |
    1,000 Pieces

    (Min. Order)

    ###

    Aligning: Non-Aligning Bearing
    Separated: Unseparated
    Feature: Vacuum, Magnetically, Low Temperature, Corrosion Resistant, High Temperature, High Speed
    Rows Number: Single
    Raceway: Deep Groove Raceway
    Material: Stainless Steel

    ###

    Samples:
    US$ 1/Piece
    1 Piece(Min.Order)

    |
    Request Sample

    ###

    Customization:

    Understanding the Different Types of Bearings

    When you are looking for a bearing, you have many options to choose from. This article will explain the various types, functions, and working principles of different types of bearings. Once you understand the basic components, you can make an informed decision about which one to buy. Here’s an overview of some of the most common types. Learn more about each type below! Read on to learn about the differences between these different types of bearings! Posted in Articles

    Functions

    bearing
    Bearings serve as an integral part of a mechanical device. These devices help transfer torque from one part of a structure to another. These mechanisms increase the efficiency of a shaft by increasing its life. However, the functions of bearings depend on the application of the structure. Among other functions, bearings provide support to shafts. Anti-friction bearings come in two types: ball and roller bearings. These components have line and point contact, which is the most common type. Archimedes’s principle states that the force is equal to the weight of the fluid that is being displaced. Bearings can transfer lateral loads to a substructure.
    A bearing has two primary functions. The first is to prevent direct metal-to-metal contact. A bearing prevents friction, heat generation, and wear and tear of components. A bearing also reduces energy consumption. Its other purpose is to guide and support a rotating body. In addition to these functions, bearings can also reduce wear and tear on a machine. As a result, they are among the most widely used machines in the world.
    Seals are a major component of a bearing. They prevent foreign materials from entering and lubricating the moving parts. The design of seal lips determines their effectiveness. Fuel economy regulations and CO2 emissions regulations are pushing the demand for low-friction bearings. However, high-performance seals do not always provide high-performance. As a result, current estimations of the friction in bearings depend on trial and error methods.
    Another important function of bearings is that they transfer the load of a rotating component to its housing. This load can be axial or radial. Bearings also limit movement to predefined directions. Some types of rolling element bearings have balls or cylinders inside. These bearings are less frictional than sliding ones, thus they allow parts to move freely during rotation. These parts can then be used for various applications. So, bearings are an integral part of machines.

    Types

    The most common type of bearing is a plain bearing. It uses surfaces in rubbing contact to transmit movement from one part to another. These bearings may be discrete or may consist of a hole in a metal sleeve or a planar surface bearing another part. Some plain bearings are flanged, while others are made of a sleeve with a flange at one end. These bearings often give acceptable accuracy and life, but they are expensive and cannot be used in large scale applications.
    Radial bearings are used when there is a need for high-speed or corrosive parts. This type of bearing also serves as a support in an intermediate situation. Its two components are called the base and the cover. The base and cover are connected and are arranged parallel to the main axis. This type of bearing is used in steady-state and axial motion applications. The radial bearings are also used when the shafts are long.
    Angular contact bearings are another type of bearing. These are easy to install and require minimal maintenance. Their races are displaced along the axis. They are also better at handling axial loads and transferring them to the housing. These types of bearings are commonly used in pumps, automobiles, and high-speed applications. If you are looking for an affordable, reliable bearing, look no further than the angular contact bearing.
    Another type of bearing is a self-lubricating bushing. These are lightweight and wear-resistant. Unlike the other types of bearing, they do not require any lubrication or maintenance. In fact, some are completely maintenance-free. But if you’re worried about maintenance, this type of bearing may be a good choice. There are many benefits of using self-lubricating bushings. It is also a good option for applications where your machine is exposed to extreme temperatures.

    Working principle

    bearing
    A bearing has two primary functions: support and load transfer. In engineering applications, the bearing tends to push the load in the direction of the shaft. A radial load pushes the bearing downward and a thrust load pushes it sideways. Both types of load transfer are important in a variety of applications. The working principle of each type is described below. Listed below are the main uses for each type of bearing.
    A plain bearing uses a PTFE liner on the interface of two moving parts. The PTFE liner acts as a lubricant and may be filtered to alter its friction. The journal bearing uses the motion of the journal to force fluid into the gap between two moving parts. This results in a small amount of play in the bearing. This play is acceptable for most applications. A ball bearing may have a maximum play of 2 mm for a ten-millimeter shaft.
    The primary function of a bearing is to assist in rotation and to reduce mechanical friction between the two objects. A bearing may be installed as a separate device or as an integral part of a machine. For more complex applications, bearings are very precise components requiring the highest standards of technology. For this reason, it is important to understand the working principle of bearings. The next time you need to lift or slide a heavy object, consider a bearing.
    Ball bearings are a common type of ball bearing and can be found in industrial machinery and automobiles. Their unique structure helps them support less weight. This is because they are comprised of two rings – an inner race and an outer race. The balls themselves have a small area of contact and transfer axial loads in one direction. A cage surrounds the balls and prevents them from colliding. This makes ball bearings a popular choice for many applications.

    Sealing system

    A bearing’s seals are vital for the operation of rolling and rotating components. These systems enable rotation and linear movement while limiting friction and dispersing stress. Without the proper seals, these components could face catastrophic failure. In addition to protecting the bearing from external forces, seals help retain lubricant inside the system and prevent harmful particles from entering the gap. A seal’s lubrication helps prevent the onset of mechanical damage and prolongs the life of the bearing.
    A bearing seal is made up of two parts: the inner sealing element and the outer sealing element. A passageway runs through the bearing assembly to the outer seal element. A hydraulic press or pneumatic jack is recommended for installing the seal. These tools are effective in reducing deformation and improving seal installation quality. When fitting the seal, ensure that the tool does not hit the seal directly. A proper adopter will distribute the load uniformly across the seal.
    The seal’s efficiency depends on its gap. A four-inch shaft seal can flow 0.5 standard cubic feet per minute. A seal’s efficiency is highly dependent on the gap size. The gap size is a cube of the flow through the system. A smaller gap size allows high flow and pressure but less leakage. If both surfaces of the seal have similar pressures and flow rates, the seal is efficient. However, a small gap reduces the pressures and reduces wear.
    Mechanical seals have numerous advantages, including their ability to protect against contaminants and splashing liquids. Labyrinth seals are the first line of defense against leaks. They operate without friction. Their high level of sealing efficiency helps ensure that the bearing remains operational for long. This type of seal is made from metal plates and is designed for a wide temperature range and misalignment. Its advantages include being easy to install and offering 100% sealing efficiency.

    Maintenance

    bearing
    Bearing maintenance is critical to ensuring that your bearings keep operating at their peak performance. Proper maintenance will improve bearing life, reduce downtime and increase productivity while reducing costs. Here is an 8-point checklist to optimize your bearings and make them last longer. To optimize their performance, you should follow these steps regularly. In case a bearing does not last long, you should replace it as soon as possible. Listed below are some tips to ensure proper maintenance.
    The first step is to determine how often your bearings require lubrication. Some manufacturers recommend that you lubricate them weekly, but this can do more harm than good. Instead, use ultrasound to measure the level of friction and trend its levels. This way, you will know exactly when to grease your bearings. It’s also important to check how often they should be inspected and calibrated. A professional can provide guidance on proper maintenance.
    Next, inspect your bearings for cracks and scratches. You should never install a bearing that has been dropped or scratched. Even a small crack will affect the performance of the bearing and could lead to its premature failure. A proper alignment is essential for the bearing to function properly. Make sure you have the correct tools to perform this task. These tools can help you reduce manual work and promote safe bearing maintenance. You should also ensure that the shaft and housing are clean and undamaged.
    Proper maintenance can prolong bearing service life. Proper lubrication, mounting, inspection, basic condition monitoring, and dismounting can extend their life. Proper maintenance extends their lifespan and improves plant productivity. While bearings are essential for machinery, you should make sure you follow the proper safety procedures every time you work with them. These tips will also help prevent accidents and maintain your machine’s efficiency. Once you’ve followed these guidelines, you can safely inspect your bearings and ensure that they’re operating at their optimum capacity.

    China UCP Ucf UCFL Plastic Stainless Steel Tansmission Parts Spherical Pillow Block Bearing     bearing blockChina UCP Ucf UCFL Plastic Stainless Steel Tansmission Parts Spherical Pillow Block Bearing     bearing block
    editor by czh 2023-01-12