China Professional Pillow Block Bearing/Spherical Bearing/Insert Bearing UCP206 Ucf206 UC206,UCP207 Ucf207 UC207,Series Farm Tractor Agricultural Machinery Bearingchina Wholesale bearing bronze

Product Description

Product Description

Pillow Block Bearing/Spherical Bearing/Insert Bearing UCP206 Ucf206 UC206,UCP207 Ucf207 UC207,Series Farm Tractor Agricultural Machinery BearingChina Wholesale

What is Bearing With Housing(Pillow Block Bearing/Insert Bearing)?
• earing With Housing(Pillow Block Bearing) is a bearing unit which combines rolling bearing with bearing seat. High precision components made of greased sealed deep groove ball bearings and bearing seats of various shapes. Most of the outer spherical bearings are made of spherical outer diameters, and are installed together with the inlet bearing seat with a spherical inner hole. The structure is diverse, and the versatility and interchangeability are good.

Outer Spherical Surface Bearing/Insert Bearing/Pillow Block Bearing/Bearing With Housing

1, With Automatic Adjustment Function

 

The outer diameter of the bearing and the inner diameter of the bearing seat are spherical matches, and there is an automatic aligning function between the two, which can compensate for the axis non-coincidence caused by the installation error and the deformation of the installation bottom surface.

 

2. Large Load Capacity

 

Because the internal structure of the outer spherical ball bearing is the same as that of the 6200 and 6300 series deep groove ball bearings, the outer spherical ball bearing with the FS seat can not only bear the radial load, but also bear a certain axial load. At the same time bearing working noise is small.

 

3, Long Service Life

 

Spherical ball bearings with seat are usually used in harsh working environments such as dirt, dust, humidity and high temperature, and the grease inside the bearing will deteriorate in the short term. Therefore, it is necessary to grease and re-lubricate the outer spherical ball bearings with seats at appropriate intervals, and replace the deteriorated grease with fresh grease. FS with cast iron outer spherical ball bearings are equipped with oil nozzles, which can be re-lubricated to ensure perfect performance and long service life in any working environment.

 

The grease can be used at normal temperature, low temperature and high temperature according to the different ambient temperature. The bearing outer ring is equipped with oil groove to better ensure that the grease can be smoothly injected into the bearing from the oil nozzle.

 

4, Good Sealing Performance

 

Both sides of the outer spherical ball bearing are equipped with heat-resistant, oil-proof rubber sealing ring and steel dust cover combination seal. The dust cover is assembled on the outer diameter of the bearing inner ring and rotates together with the inner ring, which can effectively prevent external foreign matter from entering the bearing inside and resist external pressure to protect the bearing. The combination seal composed of the sealing ring and the dust cover can prevent soil, dust and water from entering the bearing inside and prevent the grease inside the bearing from leaking. The bearing can maintain perfect working performance in harsh working environment.

 

5, Strong Bearing Seat

 

Bearing seat is a whole seat structure, bearing seat rigidity is very good, to prevent bearing deformation during assembly, bearing seat is durable under any working conditions. Bearing seat can be made of gray cast iron, ductile cast iron and cast steel and other materials.

 

6, The Bearing Can Be Easily Locked on The Shaft

 

There are 4 ways to lock the bearing on the shaft, the common method is to lock the extended end of the inner ring and other 2 setting screws, you can also use the locking sleeve, locking sleeve or eccentric sleeve locking. These 4 methods can easily lock the bearing to the shaft.
 

Detailed Photos

 

Product Parameters

 

Packaging & Shipping

Why Is Logistics Important?

• Create Added Value: Logistics Can Help Retailers Create Added Value By Ensuring They Can Deliver The Right Quality And Quantity Of Products To Their Customers. Logistics Means You Can Manage Your Entire Business More Efficiently.

•Increasing Efficiency: As Global Trade Becomes More Popular, Logistics Is Becoming An Important Part Of The Supply Chain, Reducing Costs Through Effective Collaboration With Other Businesses And Suppliers.

•Cost Savings: If You Have A Well-Managed Logistics Strategy, You Reduce The Risk That Something Will Go Wrong And Cause You To Spend Extra Money.

• Provide A Better Customer Experience: Logistics Ensures That Customers Get The Items They Want At The Quality They Expect. By Better Organizing Logistics, Businesses Can Respond Quickly To Customer Needs.

• Enhance Brand Reputation: Logistics Shows That Your Business Processes Have Been Properly Addressed, So You Can Deliver The Amazing Results Your Customers Expect. The Result Is Usually A Better Brand Image And More Sales.

We Have A Professional Logistics Company For Transportation, To Ensure That The Goods Can Be Delivered On Time And Safely

Company Profile

 

HangZhou Chaokun Bearing Co., Ltd. Is A Research And Development Production And Sales In One Physical Factory,
The Main Products
• Deep Groove Ball Bearings
• Aligning Ball Bearings
• Cylindrical Roller Bearings
• Self-Aligning Roller Bearings
• Outer Spherical Bearings
• Angular Contact Bearings
• Thrust Ball Bearings
• Thrust Roller Bearings

Our Advantages

 

Our advantage
1. OEM or Non-Stand Bearings: Any requirement for Nonstandard bearings is Easily Fulfilled by us due to its vast knowledge.
2. Genuine products With Excellent Quality: The company has always proved the 100% quality products it provides with genuine intent.
3. After Sales Service and Technical Assistance: The company provides after-sales service and technical assistance as per the
    customer’s requirements and needs.
4. Quick Delivery: The company provides just-in-time delivery with its streamlined supply chain. 
SAMPLES
1. Samples quantity: 1-10 PCS are available. 
2. Free samples: It depends on the Model No., material and quantity. Some of the bearings samples need client to pay samples charge and shipping cost. 
3. It’s better to start your order with Trade Assurance to get full protection for your samples order. 

FAQ

OEM policy

1. We can print your brand (logo, artwork) on the shield or laser engraving your brand on the shield.

2. We can customize your packaging according to your design

3. All copyright belongs to the customer, we promise not to disclose any information.
What Is The Minimum Order?

•Depending on the model, you can send me information for your calculati.

Are You Factory Or Trade Compay?
We Are Manufacturer/Factory & Trading Company,we have been engaged in bearing development and manufacturing industry for more than years.
How Long Is The Delivery Time?
It Depends On The Model And Quantity, Usually Within 15 Days.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Aligning: Non-Aligning Bearing
Rows Number: Single
Load Direction: Radial Bearing
Material: Chrome Steel Stainless Steel
Product Name: Pillow Block Bearing/Insert Bearing
Product Characteristics: Long Service Life, Iarge Load Capacity
Samples:
US$ 0.1/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

pillow block bearing

What challenges are associated with lubrication distribution in pillow block bearings, and how are they addressed?

Lubrication distribution in pillow block bearings can pose certain challenges, but these challenges can be effectively addressed through various methods and techniques. Here are the key challenges associated with lubrication distribution in pillow block bearings and their corresponding solutions:

  • Inadequate Lubricant Supply:
  • One common challenge is ensuring an adequate and consistent supply of lubricant to the bearing. Inadequate lubrication can lead to increased friction, heat generation, and premature wear. To address this challenge, proper lubrication procedures should be followed, including using the correct type and quantity of lubricant recommended by the bearing manufacturer. Regular lubrication inspections and monitoring can help ensure that the bearing receives sufficient lubricant to maintain optimal performance.

  • Lubricant Contamination:
  • Contamination of the lubricant can occur due to various factors, such as the ingress of dirt, dust, or moisture into the bearing housing. Contaminated lubricant can hinder proper lubrication distribution and compromise the bearing’s performance. To address this challenge, effective sealing mechanisms, such as rubber seals or labyrinth seals, are incorporated into pillow block bearings to prevent the entry of contaminants. Regular inspection and cleaning of the bearing housing and lubrication system can also help maintain a clean lubricant supply.

  • Uneven Lubrication Distribution:
  • Uneven distribution of lubricant within the bearing can lead to localized areas of high friction and increased wear. This can occur due to factors such as improper lubrication techniques, misalignment, or the presence of obstructions within the bearing housing. To address this challenge, it is crucial to follow the manufacturer’s guidelines for lubrication methods and intervals. Proper alignment of the bearing and shafts, along with regular inspection and maintenance, can help ensure even lubricant distribution and prevent premature wear.

  • Over-Lubrication:
  • Over-lubrication can be as detrimental as inadequate lubrication. Excessive lubricant can result in increased drag, higher operating temperatures, and potential leakage. It can also lead to the accumulation of contaminants within the bearing housing. To overcome this challenge, it is essential to adhere to the recommended lubrication quantities specified by the bearing manufacturer. Monitoring techniques, such as visual inspection or the use of condition monitoring tools, can help identify signs of over-lubrication and allow for adjustments to be made accordingly.

  • Lubricant Degradation:
  • Lubricants can degrade over time due to factors such as oxidation, contamination, or high operating temperatures. Degraded lubricants lose their effectiveness, leading to inadequate lubrication and increased friction. To address this challenge, regular lubricant analysis and monitoring can help determine the lubricant’s condition and identify the need for replenishment or replacement. Lubricant selection should also consider the operating conditions and temperature ranges to ensure optimal performance and longevity.

  • Automatic Lubrication Systems:
  • Pillow block bearings in certain applications benefit from the use of automatic lubrication systems. These systems provide a controlled and consistent supply of lubricant to the bearing, eliminating the challenges associated with manual lubrication. Automatic lubrication systems can be designed to deliver precise amounts of lubricant at regular intervals, ensuring optimal lubrication distribution. They can also incorporate monitoring features to detect abnormalities or malfunctions in the lubrication system and allow for timely corrective actions.

In summary, challenges associated with lubrication distribution in pillow block bearings include inadequate lubricant supply, lubricant contamination, uneven distribution, over-lubrication, lubricant degradation, and the need for precise and consistent lubrication. These challenges can be effectively addressed through proper lubrication procedures, sealing mechanisms, regular inspection and maintenance, adherence to manufacturer guidelines, monitoring techniques, lubricant analysis, and the use of automatic lubrication systems where applicable. By addressing these challenges, optimal lubrication distribution can be achieved, leading to improved performance, reduced wear, and extended bearing life.

pillow block bearing

How do different types of pillow block bearings, like split and solid, differ in terms of design and functionality?

Different types of pillow block bearings, such as split and solid designs, exhibit variations in their design and functionality. Here’s a detailed explanation of how these types differ:

  • Split Pillow Block Bearings:
  • Split pillow block bearings, also known as split plummer block bearings, are designed with a split housing that allows for easy mounting and dismounting without the need to remove other components or disassemble the shaft. The housing is divided into two or more parts, typically split horizontally or vertically, which can be separated to access the bearing. The split design offers several advantages:

    • Easy Installation and Maintenance: Split pillow block bearings simplify the installation and maintenance process by providing convenient access to the bearing without dismantling the shaft or surrounding equipment. This feature is particularly beneficial in scenarios where quick and efficient bearing replacement or inspection is required.
    • Space Constraints: Split bearings are advantageous in applications where space limitations make it challenging to maneuver or remove solid bearings. The split design allows for easy insertion and removal of the bearing, even in confined spaces.
    • Shaft Alignment: Split pillow block bearings often incorporate features that assist with shaft alignment. This ensures proper alignment between the rotating shaft and the bearing, reducing friction, wear, and vibration.
    • Temperature Expansion: The split housing design accommodates thermal expansion or contraction of the bearing components. This capability is particularly important in applications where temperature variations occur, preventing potential damage or misalignment due to thermal effects.
  • Solid Pillow Block Bearings:
  • Solid pillow block bearings, also referred to as solid plummer block bearings, have a one-piece housing that encloses the bearing. The housing is typically made of cast iron, ductile iron, or other durable materials. Solid pillow block bearings offer the following characteristics:

    • Stability and Strength: Solid bearings provide a robust and rigid housing, offering excellent stability and support for the bearing and the shaft. They are capable of handling high loads and resisting deformation or deflection under heavy operating conditions.
    • Environmental Protection: The solid housing design provides enhanced protection against contaminants, moisture, and debris. It helps to shield the bearing from external elements, reducing the risk of premature wear, corrosion, or damage.
    • Sealing Options: Solid pillow block bearings often feature various sealing options, such as rubber seals, felt seals, or labyrinth seals. These seals help to retain the lubricant and prevent the ingress of contaminants, maintaining the integrity and performance of the bearing.
    • Design Variations: Solid bearings are available in different configurations and styles to accommodate specific application requirements. This includes variations in the shape, dimensions, mounting methods, and sealing arrangements of the housing.

In summary, split pillow block bearings and solid pillow block bearings differ in their design and functionality. Split bearings offer easy installation and maintenance, space-saving advantages, assistance with shaft alignment, and accommodation for temperature expansion. On the other hand, solid bearings provide stability, strength, environmental protection, sealing options, and various design variations. The choice between these types depends on the specific application needs, including accessibility requirements, load capacity, environmental conditions, and maintenance considerations.

pillow block bearing

What are pillow block bearings and how are they used in various industrial applications?

Pillow block bearings, also known as plummer block bearings, are a type of bearing mounted inside a housing or block, typically made of cast iron or pressed steel. These bearings are widely used in various industrial applications due to their versatility and ease of installation. Here’s a detailed explanation of pillow block bearings and their uses:

  • Design and Construction:
  • A pillow block bearing consists of a bearing insert (such as a deep groove ball bearing, spherical roller bearing, or cylindrical roller bearing) and a housing or block. The housing is typically a split design that allows for easy installation and maintenance. It usually has a flat base with mounting holes for attachment to a support structure, such as a machine frame or conveyor system. The bearing insert is pre-mounted inside the housing and provides the rotating element to support shafts or other moving parts.

  • Supporting Shaft Loads:
  • Pillow block bearings are primarily used to support rotating shafts and transmit loads between the shaft and the housing. They are capable of handling both radial and axial loads, depending on the type of bearing insert used. The design of the pillow block bearing allows for self-aligning capability, which helps accommodate slight misalignments or shaft deflections, ensuring smooth operation and reducing stress on the bearing.

  • Easy Installation and Maintenance:
  • One of the key advantages of pillow block bearings is their ease of installation and maintenance. The split housing design allows for quick assembly and disassembly without the need to remove other components or disassemble the entire system. This feature simplifies bearing replacement, lubrication, and inspection, reducing downtime and maintenance costs in industrial applications.

  • Versatility and Adaptability:
  • Pillow block bearings are highly versatile and adaptable to various industrial applications. They can be found in a wide range of industries, including manufacturing, mining, agriculture, construction, and material handling. These bearings are used in conveyor systems, power transmission equipment, pumps, fans, compressors, and many other rotating machinery applications.

  • Environmental Protection:
  • Pillow block bearings are designed to provide a degree of environmental protection to the bearing insert. The housing acts as a shield, preventing contaminants such as dust, dirt, and moisture from entering the bearing and causing premature failure. Additionally, the housing design often includes provisions for grease or oil lubrication, further protecting the bearing and ensuring proper lubrication for optimal performance.

  • Specialized Variations:
  • While the basic design of pillow block bearings remains the same, there are specialized variations available to meet specific application requirements. These include corrosion-resistant bearings for harsh environments, high-temperature bearings for elevated temperature applications, and sealed bearings for applications where additional protection against contamination is needed.

In summary, pillow block bearings are bearing units housed in a block or housing, widely used in various industrial applications. They provide support for rotating shafts, transmit loads, accommodate misalignments, and offer easy installation and maintenance. Their versatility, adaptability, and environmental protection make them suitable for diverse industrial sectors. With specialized variations available, pillow block bearings can be customized to meet specific application needs, ensuring reliable and efficient operation in a wide range of industrial machinery and equipment.

China Professional Pillow Block Bearing/Spherical Bearing/Insert Bearing UCP206 Ucf206 UC206,UCP207 Ucf207 UC207,Series Farm Tractor Agricultural Machinery Bearingchina Wholesale   bearing bronzeChina Professional Pillow Block Bearing/Spherical Bearing/Insert Bearing UCP206 Ucf206 UC206,UCP207 Ucf207 UC207,Series Farm Tractor Agricultural Machinery Bearingchina Wholesale   bearing bronze
editor by CX 2024-04-25