China Hot selling Pillow Block Bearings UCT 203 for Agricultural Machinery by CZPT Factory bearing engineering

Product Description

Specification

The outer spherical ball bearing is actually a variant of the deep groove ball bearing, which is characterized in that the outer diameter outer surface of the outer ring ball is spherical, and can be fitted into the corresponding concave spherical surface of the bearing seat to serve as a centering function. The outer spherical bearing is mainly used to bear the radial and axial combined load mainly based on the radial load, and generally it is not suitable to bear the axial load alone.
This type of bearing can be fitted with inner ring (with full set of rollers and retainers) and outer ring                                                                                                                             
Related Bearings
Spherical ball bearing with seat is also designed to be self-aligning, easy to install, and have a double-structured seal that can operate in harsh environments. The bearing housing is generally cast molded. Commonly used seats are vertical seat (P), square seat (F), boss square seat (FS), boss circular seat (FC), CZPT seat (FL), ring seat (C), slider seat, etc. T).
 

Unit No.  Dimension (mm) Bearing No. Housing No. Weight(kg)
d o g p g S b k e a w j l h t B n
UCT201 12 16 10 51 32 19 51 12 76 89 94 32 21 61 44.5 31 12.7 UC201 T201 0.8
UCT202 15 16 10 51 32 19 51 12 76 89 94 32 21 61 44.5 31 12.7 UC202 T202 0.79
UCT203 17 16 10 51 32 19 51 12 76 89 94 32 21 61 44.5 31 12.7 UC203 T203 0.78
UCT204 20 16 10 51 32 19 51 12 76 89 94 32 21 61 44.5 31 12.7 UC204 T204 0.76
UCT205 25 16 10 51 32 19 51 12 76 89 97 32 24 62 48 34.1 14.3 UC205 T205 0.81
UCT206 30 16 10 56 37 22 57 12 89 102 113 37 28 70 53 38.1 15.9 UC206 T206 1.22
UCT207 35 16 13 64 37 22 64 12 89 102 129 37 30 78 59.5 42.9 17.5 UC207 T207 1.44
UCT208 40 19 16 83 49 29 83 16 102 114 144 49 33 89 69 49.2 19 UC208 T208 2.4
UCT209 45 19 16 83 49 29 83 16 102 117 144 49 35 87 69 49.2 19 UC209 T209 2.36
UCT210 50 19 16 83 49 29 86 16 102 117 149 49 37 90 74.5 51.6 19 UC210 T210 2.43
UCT211 55 25 19 102 64 35 95 22 130 146 171 64 38 106 76 55.6 22.2 UC211 T211 4.11
UCT212 60 32 19 102 64 35 102 22 130 146 194 64 42 119 89 65.1 25.4 UC212 T212 4.97
UCT213 65 32 21 111 70 41 121 26 151 167 224 70 44 137 89 65.1 25.4 UC213 T213 6.65

Application
1. Automatic controlling machine
2. Semi-conductor industry
3. General industry machinery
4. Medical equipment
5. Solar energy equipment
6. Machine tool
7. Parking system
8. High-speed rail and aviation transportation equipment, etc.

Packaging & Shipping for UCPA series

Packaging Detail 1.Industrial Exporting Package
2. Individual plastic/Carton/pallet
3. As the customers’ requirements
Delivery Detail 30-45 days for normal order

About us
HangZhou Kent bearing company was established in 2, 63192752 Fax: Address: Mayan Industry Zone, Henghe Town, HangZhou, HangZhou, China

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Contact Angle: 0
Aligning: Non-Aligning Bearing
Separated: Separated
Rows Number: Single
Load Direction: Radial Bearing
Material: Cast Iron
Samples:
US$ 2/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

pillow block bearing

What role do pillow block bearings play in applications with varying temperature and environmental conditions?

Pillow block bearings play a crucial role in applications with varying temperature and environmental conditions by providing reliable and durable support for rotating shafts and components. Their specific contributions in such applications can be explained as follows:

  • Temperature Stability:
  • Pillow block bearings are designed to withstand a wide range of operating temperatures. They are often constructed with materials that can handle both high and low temperature extremes. Specialized heat-resistant materials, such as high-temperature alloys or heat-treated steels, are used to ensure the bearing’s stability and integrity even in applications with elevated temperatures. By maintaining their structural integrity under varying temperature conditions, pillow block bearings help ensure the continued functionality and performance of the machinery.

  • Expansion and Contraction Compensation:
  • Varying temperature conditions can cause thermal expansion and contraction of the components in machinery. Pillow block bearings are engineered to accommodate these dimensional changes. By allowing for slight movement and adjustment due to thermal expansion, they help prevent excessive stress on the shafts and other components. This compensation for thermal expansion and contraction contributes to the overall stability and longevity of the machinery, even in environments with significant temperature fluctuations.

  • Environmental Protection:
  • In applications with varying environmental conditions, pillow block bearings provide protection against contaminants, moisture, and other external elements. They often incorporate sealing mechanisms, such as rubber seals or labyrinth seals, to prevent the entry of dirt, dust, water, and other contaminants into the bearing. This protection helps maintain the cleanliness and integrity of the bearing’s internal components, reducing the risk of premature wear, corrosion, or damage caused by environmental factors. By safeguarding the bearing, pillow block bearings ensure reliable and efficient operation in environments with varying conditions.

  • Corrosion Resistance:
  • In corrosive environments where moisture, chemicals, or other corrosive agents are present, pillow block bearings with corrosion-resistant materials, such as stainless steel or special coatings, offer additional protection. These bearings are designed to withstand the corrosive effects of the environment, preventing degradation and maintaining their functionality over an extended period. By providing corrosion resistance, pillow block bearings enhance the reliability and lifespan of machinery operating in environments with varying temperature and corrosive conditions.

  • Shock and Vibration Absorption:
  • Applications with varying temperature and environmental conditions often involve machinery subjected to shocks and vibrations. Pillow block bearings are engineered to absorb and dampen these shocks and vibrations, reducing their impact on the rotating shafts and other components. This absorption capability helps prevent excessive stress, minimizes the risk of component failure, and ensures the smooth and reliable operation of the machinery, even in environments with dynamic conditions.

  • Maintenance and Longevity:
  • Pillow block bearings designed for applications with varying temperature and environmental conditions often incorporate features that simplify maintenance and extend bearing life. They may have lubrication systems or self-lubricating properties that ensure proper lubrication even in challenging environments. Additionally, they may be designed for easy inspection, cleaning, and replacement, allowing for timely maintenance and minimizing downtime. These features contribute to the longevity and reliability of the machinery in applications with varying temperature and environmental conditions.

In summary, pillow block bearings play a critical role in applications with varying temperature and environmental conditions by providing temperature stability, compensating for expansion and contraction, protecting against contaminants and corrosion, absorbing shocks and vibrations, and facilitating maintenance and longevity. Their ability to withstand and adapt to changing conditions ensures the reliable operation and extended lifespan of machinery in diverse environments.

pillow block bearing

Are there specific maintenance practices that can extend the lifespan of pillow block bearings?

Yes, there are specific maintenance practices that can help extend the lifespan of pillow block bearings. By following these practices, you can optimize the performance, reliability, and longevity of the bearings. Here are some essential maintenance practices for pillow block bearings:

  • Regular Inspection:
  • Perform regular inspections of the pillow block bearings to check for any signs of wear, damage, or contamination. Inspect the bearing housing, seals, lubrication, and any visible components. Regular inspections help identify issues early on and allow for timely maintenance or replacement.

  • Lubrication:
  • Proper lubrication is crucial for the smooth operation of pillow block bearings. Follow the manufacturer’s recommendations for the type of lubricant and the appropriate lubrication intervals. Ensure that the bearing is adequately lubricated to reduce friction, prevent excessive wear, and protect against corrosion.

  • Cleanliness:
  • Maintain cleanliness in the surrounding area of pillow block bearings to prevent the entry of contaminants. Keep the bearing housing clean and free from dirt, dust, and debris that can cause damage or hinder smooth operation. Regularly clean the bearing housing and seals as part of your maintenance routine.

  • Alignment:
  • Ensure proper alignment of the pillow block bearings and the associated components. Misalignment can lead to increased stress, vibration, and premature wear. Align the bearings according to the manufacturer’s specifications and make adjustments as necessary to maintain proper alignment.

  • Temperature Monitoring:
  • Monitor the operating temperature of the pillow block bearings. Excessive heat can indicate potential issues such as inadequate lubrication or bearing damage. Continuously high temperatures can accelerate wear and reduce the lifespan of the bearings. Regularly check the temperature and address any abnormal readings promptly.

  • Training and Documentation:
  • Provide proper training to personnel responsible for the maintenance of pillow block bearings. Ensure they understand the correct procedures for inspection, lubrication, and other maintenance tasks. Maintain documentation of maintenance activities, including lubrication schedules, inspections, and any repairs or replacements, for reference and tracking purposes.

  • Replacement when Necessary:
  • Finally, it is important to replace pillow block bearings when they show signs of significant wear, damage, or have reached their expected lifespan. Continuing to operate with worn or damaged bearings can lead to failures, production disruptions, and potential safety hazards. Follow the manufacturer’s recommendations and consult with bearing specialists or technicians to determine the appropriate timing for replacement.

By implementing these maintenance practices, you can extend the lifespan of pillow block bearings, improve their performance, and minimize the risk of unexpected failures. Regular inspections, proper lubrication, cleanliness, alignment, temperature monitoring, training, documentation, and timely replacement are key factors in ensuring the longevity and efficient operation of pillow block bearings.

pillow block bearing

Can you explain the design principles of pillow block bearings and their functions?

Pillow block bearings, also known as plummer block bearings, are designed based on certain principles to ensure their functionality and performance. Understanding the design principles can provide insights into how these bearings operate and fulfill their intended functions. Here’s a detailed explanation of the design principles of pillow block bearings and their functions:

  • Housing Design:
  • The housing of a pillow block bearing is typically made of cast iron or pressed steel and has a split design. The split housing allows for easy installation and maintenance by providing access to the bearing insert without the need to disassemble the entire system. The housing also includes mounting holes or slots for attaching the bearing to a support structure, such as a machine frame or conveyor system.

  • Bearing Insert:
  • The bearing insert is a key component of a pillow block bearing. It is pre-mounted inside the housing and provides the rotating element to support shafts or other moving parts. The design of the bearing insert depends on the specific application requirements. Common types of bearing inserts used in pillow block bearings include deep groove ball bearings, spherical roller bearings, and cylindrical roller bearings. The selection of the appropriate bearing insert depends on factors such as load capacity, speed, and environmental conditions.

  • Self-Aligning Capability:
  • Pillow block bearings are designed with a certain degree of self-aligning capability. This means that they can accommodate slight misalignments or shaft deflections without causing undue stress on the bearing or affecting its performance. The self-aligning capability is achieved through the design of the bearing insert and the housing. It helps to ensure smooth operation, reduce wear, and prolong the bearing’s service life.

  • Load Support:
  • Pillow block bearings are primarily designed to support rotating shafts and transmit loads between the shaft and the housing. They are capable of handling both radial and axial loads, depending on the type of bearing insert used. The design of the bearing insert and the housing is optimized to provide optimal load-carrying capacity and distribute the loads evenly, minimizing stress concentrations and maximizing the bearing’s performance.

  • Lubrication:
  • Lubrication is crucial for the proper functioning and longevity of pillow block bearings. The housing design often includes provisions for grease or oil lubrication. Lubrication helps to reduce friction, dissipate heat, prevent wear, and protect against corrosion. Proper lubrication ensures smooth operation, minimizes power losses, and extends the service life of the bearing.

  • Environmental Protection:
  • Pillow block bearings are designed to provide a degree of environmental protection to the bearing insert. The housing acts as a shield, preventing contaminants such as dust, dirt, and moisture from entering the bearing and causing premature failure. The housing design may include features such as seals or shields to further enhance the protection against contaminants. This design principle helps to maintain the integrity of the lubrication and ensure reliable operation in various working environments.

In summary, pillow block bearings are designed based on certain principles to ensure their functionality and performance. The housing design allows for easy installation and maintenance, while the bearing insert provides the rotating element to support shafts and transmit loads. The self-aligning capability accommodates misalignments, and the optimized design of the bearing insert and housing ensures proper load support. Lubrication and environmental protection features contribute to smooth operation and extended service life. Understanding these design principles helps in selecting and utilizing pillow block bearings effectively in various industrial applications.

China Hot selling Pillow Block Bearings UCT 203 for Agricultural Machinery by CZPT Factory   bearing engineeringChina Hot selling Pillow Block Bearings UCT 203 for Agricultural Machinery by CZPT Factory   bearing engineering
editor by CX 2024-04-15